Hey All, I am new to PS, love it - I use it for everything now lol. I am trying to do some jersey designs and up until a few days ago I was able to use the bucket tool to change the various sections. I probably clicked on something and now the bucket fills up the entire jersey making it pretty much impossible to ad various colors etc. I could have sworn that all 3 attached images were allowing me to edit the various parts without affecting the rest of the image- i.e. jersey arms, shoulders, chest, neck, neck lining, etc etc - were all separate elements.
I am attaching the files I am using. If anyone can help out you would be really helping me out - I spent half the day and no luck.
On the same note - How would I search for a tutorial on creating various sections within an image i.e. I have a JPG of a jersey and I want to play around with it, so what is the action called to be able to cut it up into different sections? Am I making Sense? If I want to make he red jersey's shoulders, arms, and neck lining as separate elements which I could manipulate without affecting the rest; what would that be called so I could look into a tutorial. Thanks.
Does anyone have a tutorial on how to properly layer an image for the best effect.
For example, I have my guy he
I'd like to put our logo literally behind him to take the place of the door and imagery in the background of his picture. Here is the logo:
I know I could do a combiation of the magic tool/cut tool and erasing to get the background imagery out the way but is there a shorter/better way to get the logo behind just his face,neck and shoulders???
Any help would be appreciated guys.
Thanks a bunch!!
I saw this photoshop action the other day I was impressed with. I'm on the hunt for a similar Action but I'm completely lost on what search terms to use in my hunt.
I have 4 images that give you an idea what the action does. I will also use the images to help explain my confusion.
IMAGE 1 -- nothing special here -- just showing you the image loaded into PS.
IMAGE 2 -- Image 2 shows you the first step of the action. It basically gives you an outline of the image and changes the background. I would love to have the background color to be all white but all in all this is ok.
IMAGE 3 - In this image I'm showing that you can use any brush to paint in what you want to show on the image. This is where I get lost in my search. I have been looking for an action that can convert the background like you see in image 2 above and than give you the ability to paint what you want to show in the image. I have used terms like "sketch painting" "pencil painting" "painting image" "brush painting" "mask painting" but I can not find any actions that does what you see in these images.
IMAGE 4 - When you are done brushing , you can continue the action and it will change what you brushed in to look like a painting.
Ok..............I'm looking for actions that basically does the above. The two key elements of the action is how it handles the background and also gives me the ability to use a brush tool to paint what I want seen in the final results. Most actions I seen will just convert the whole image to look like a painting.........I want more control of what is seen in the final results by using a brush to paint what I want seen in the final results. What it converts to in the end isn't important but I would love to find something where I could convert the image so it looks like a painting, a pencil sketch, comic sketch, etc.
You can help me with what to search for or even better yet, if you know where I can find such actions, please point the way.
I spent 2 days on GraphicRiveer with very little luck or what I find did not provide me enough info for me to be certain I was getting what I wanted. Other than GraphicRiver, I have been googling but no luck.
Thanks
Ok guys so ill start by saying that I am new to Photoshop, slowly learning my way threw things as I go. I picked up adobes offer on Photoshop/lightroom so those are the only 2 programs i currently have to work with. I am on a paintball team and we got jerseys made. We had quite a few problems with the company printing them so they offered to throw a free banner in for us. The issue is that we didnt already have a banner designed and since the design cost would be on the company printing it now they came up with a pretty horrible design, they literally just took the front of our jersey and put it on the banner and it looks pretty bad. Im having a roadblock on how i could even design this banner so I was hoping to have a little input from everyone here. I will post our jersey below, their suggested banner, and then just a fun little mock up that I did trying to learn my way threw photoshop. Please note that on my mock up i used words instead of actual sponsor logos, i need to use logos in the actual banner but couldnt get it to look right with them in mine.
I started a project with flowers. What I want is to make the body looks like is created by flowers.
What I did was:
retouched the original pic...I selected the different areas like arms, chest & neck there is a little white line around my selections .. .which i don't know how to remove.. I try select modify, feather, also to apply blur filter, but both don't work ...
...copy paste the flower image and play with the different blend modes.
I saw that the light falls differently on the body parts so I try to equal the light over the flower layer, using a low opacity brush with soft edges on a new layer,
but i think I'm missing something. Also I have completely stuck with the face.
I will appreciate your comments, advises and help.
PS. both pics were taken by me.
Hello! I'm making a poster for silk-screening. Each color needs to be on a separate layer so that each color can be hand-printed one at a time. Foolishly, I did not draw the colors on separate layers. I need a layer for the white outline, a layer for the purple, and the remaining layer the black (which will just be the color of the paper for those familiar with silk-screening). Posterizing doesn't seem to work, and selecting color range doesn't seem to nail it exactly either. I would greatly appreciate any help.
I am attaching the PSD file. Please do not reproduce this image (though i don't know why anyone would!)
Hello again,
I'm editing an image and I've spent lots of time refining the details. I had to grab the image from a background and it did not leave so easily, at least for me, but I've gotten passed that. I'm now doing some finishing touches. There's some small parts of the image that lost detail in the transfer from backgrounds and some of it got muddy in areas as well. I am wondering what the best way to take individual parts of the image and put them in place underneath the edited image so that when I erase everything the quality piece of the image is revealed.
Thanks,
J
is photoshop able to measure color separate parameters like value, chroma and hue? like on the image below:
Hi all, I'm new to the forum and I'm a freelance researcher in image editing.
I'm italian, so sorry in advance for my english .
I'm also a little crazy , I left my job as employee 'cause I believe in my researches and I want to make them my only job.
I developed a new effect for substituting colors in images. I would like to test the goodness of this new approach useful for retouching photos ... so I ask you a little collaboration, if you want to help me, you should retouch the image that I attached in this way: change the color of the pen fromred to white.
It's important to me to know how much time you spent in retouching the image and what applications you used for achieving the result, so please post the altered image together with the requested info. In a few days I'll post the image elaborated with my algorithm.
Really thanks to all, in advance, for the collaboration.
GS
I need someone to edit a PrintScreen for me. You would only have edit around 6 simple elements. Will pay 10 USD . For more info please message me or post here. You will have to change some numbers in the image, and copy and paste certain elements. Price is negotiable. Thank You!
Hi,
I have an image that I wanted to alter part of, and cannot work out how to do it. In the attached pic, the yellow marker on the far right is turned too far to the right (the black part of the cap shows it is too far right and not 'face on' to the camera). Similarly the green pen second in from the left has the same issue.
How can I isolate the markers with this issue, and rotate them vertically (on the axis as such) so that the images of these markers are directly 'face on' like the rest of the markers?
I have read about 3D conversions but not sure how to do it, and would have thought there is another way to resolve rather than having to convert the image to 3D? Appreciate any advice.