Request For Assistance To Create An Action

Hi,

Today I saw a picture that looks different on black background and on white. There is an example attached. Does anybody knows how to do this? I found an explanation on the link below, but doesn't worked for me (when I create the subtract layer, it doesn't result on a transparency layer):

graphicdesign.stackexchange.com/questions/9088/image-that-looks-different-on-black-background-and-on-white

All I know is that the final image must be a PNG file, with transparency on it... But don't know how to merge the two images to get the effect of different images depending on the background color (black or white).

Can anybody help me to understand that effect?

i have a signature watermark i put on my favorite images currently i have it is saved as a psd so i open it then move it onto the image, i was trying too create a brush that done this but the writing is white so becomes transparent when i make a new brush and only the camera icon is visible, i also tried to create an action where i recorded opening the psd , moving it onto an image, i was hoping this would work but didnt , something about move brush not defined if i remember, also the brush i created turns out sort of a green color see bottom image i know there probably a simple way around it and would appreciate any help , ive attatched an image of the signature so you know where im at , its transparent i just put a grey layer behind so you can see,

Hi

I have a file with 760 layers plus a background that is a photo. The layers are rasterised smart layers from Illustrator

I have a task by which I have to have the background always visible. I then make the first layer visible as well as the background and then save for web and devices. Once one I turn that layer off and then turn the next layer on and then save for web and devices. 760 times Oh God!!!!

I know I can create an action and even a droplet from the action the issues I have is how do I tell the action to turn the first layer on and then optimize the resultant image and then turn that layer off and then move to the nest layer and so on through the 760 layers

Any ideas would be great

Thanks

I saw this photoshop action the other day I was impressed with. I'm on the hunt for a similar Action but I'm completely lost on what search terms to use in my hunt.

I have 4 images that give you an idea what the action does. I will also use the images to help explain my confusion.

IMAGE 1 -- nothing special here -- just showing you the image loaded into PS.



IMAGE 2 -- Image 2 shows you the first step of the action. It basically gives you an outline of the image and changes the background. I would love to have the background color to be all white but all in all this is ok.



IMAGE 3 - In this image I'm showing that you can use any brush to paint in what you want to show on the image. This is where I get lost in my search. I have been looking for an action that can convert the background like you see in image 2 above and than give you the ability to paint what you want to show in the image. I have used terms like "sketch painting" "pencil painting" "painting image" "brush painting" "mask painting" but I can not find any actions that does what you see in these images.



IMAGE 4 - When you are done brushing , you can continue the action and it will change what you brushed in to look like a painting.



Ok..............I'm looking for actions that basically does the above. The two key elements of the action is how it handles the background and also gives me the ability to use a brush tool to paint what I want seen in the final results. Most actions I seen will just convert the whole image to look like a painting.........I want more control of what is seen in the final results by using a brush to paint what I want seen in the final results. What it converts to in the end isn't important but I would love to find something where I could convert the image so it looks like a painting, a pencil sketch, comic sketch, etc.

You can help me with what to search for or even better yet, if you know where I can find such actions, please point the way.

I spent 2 days on GraphicRiveer with very little luck or what I find did not provide me enough info for me to be certain I was getting what I wanted. Other than GraphicRiver, I have been googling but no luck.

Thanks

Hello everyone, I'm fairly new to Photoshop CS 5 so I apologize if I am asking the wrong type of questions, here goes:

When working with Vector Masks can you:
1) "Link" or "share" one image's vector mask with other images? (ex. If I made "Building A" then duplicated it, but then wanted to change what Building A looked like, I would only have to change the source mask and the copies would be updated.
2) Move the image independent of the vector mask (it seems like I can only move the vector mask, not the image itself). Or in other words: can I move the image and have the mask follow it, instead of only being able to move the vector mask inside of the image boundaries?

My application of the question:
I'm making a 2D top down layout of a "city block" type area. To fill in the buildings, I've made Building A,B,C etc, and use multiple copies of each building. Ideally, I would like to be able to "link" or share say Building A's vector mask with all the other instances of Building A (so that when I change the master, they all change to the new mask shape). The second behavior I'm trying to find is the ability to move the layer without moving where the Vector Mask is on that layer (since it seems that you can only move where the mask is, meaning that even if I could share masks, they would all end up in the same place meaning I would have to re-position each one by hand again.

Any ideas are appreciated, thank you for reading.

Hello,
I wondered if someone would hear me out and possibly help or advise me.
In the attachment there is a great picture of a bass jumping with the sky and sunset in the background.
I added a white paw to the sky and hope to make it look or blend in as a beleivable cloud in the sky.
My novice thoughts about how I might do this was as follows:
1) create and save a precise selection of the paw with a close detailed trace (I am having trouble donig this ste) and save the selction.
2) take that selection to the background copy layer and delete all the area inside that selection
3) take the background copy for cloud breakthrough layer and place it below the background copy layer with color enhancements to show through the holes in the background copy layer.

there is also a cloud paw layer which I aborted efforts working with.

-Bottom line is I am looking for a cloud paw in the sky which looks good, an orange emphasis is desired.

If you can do some work in the file and post it back up or at least advise how you would reccomend I try and go about it would be greatly appreciated.
BTW - The selection process really giving me fits with the idea I had, If you know of a great selection tutorial please send me some info.

Thanks,
Joe

Hi all!
We're using photoshop to prepare assets for a game engine, and i'm trying to find a good workflow, which i can then teach to my artist.
At this point, i have an image with five layers. 12345

Layers 2-5 each have a layer mask on them.

Now what i want to do is, copy the layer mask of layer 2, and paste it into the Red colour channel of layer 1
then mask of layer 3 into the green channel of layer 1
layer 4 into the blue channel
and layer 5 into the alpha channel

So the result is that the channels of that layer will each look identical to the layer masks, and thus layer 1 will look like a wierd (but programatically meaningful) mishmash of colours.

I'm having some problems though.




Apologies for the massive image.
This is the green channel that i've gained from the above procedure. The big gradiented circle in the middle is what i made, but for some reason i have this white stripe down the left side too. I have no idea what that is or why it's there. It appears on both he green and blue channels when i paste in a mask. But if you look at the channel image in the right hand panel, it doesn't seem to have a stripe down it.

the stripe is definitely there, it's affecting the main image, and its annoying me.

any thoughts what might be causing that?

Probably a bad subject title so let me explain what I am trying to do.

I have a very basic image (screenshot 1). Trust me, this is not an exercise but similar to the image I will be using,ha!

I select each white circle and using smart erase I can erase each circle (screenshot 2) but I want a feathered/gradient effect like (screenshot 3).

Then when I add a background color it gives the effect I am after (screenshot 4).

So here is the issue - Each image will have 100's of white dots and they will be random on each image (sort of like a star field would be a good comparison). So I need to find a way to perform the same procedure all at once on all the dots (preferred way I would think), sort of like using smart erasure but with a feather effect, or need to create an "action" that will do that.

So I guess my questions a

1. Can one create a gradient that goes from "eraser-to-black", and then save it as a mask? (to use for question 2)

2. or perform the same task on each selected spot at the same time using a mask or

3. If I need to create an "action" for this how would one move from one spot to the next to perform the task on each spot?

Since I am new here I am beginning to search through the massive forums here but thought I would throw this out will I keep searching. Thanks so much.

Clutch

Trying to figure out how I can batch watermark images with different PPI.
My current method:
Open Actions:
Create action-Watermark
Record
I open the image I want to watermark, all horizontal/vertical images I place my watermark symbol (.png file) - File - Place Resize the watermark, then vertically and horizontally align. Save End Record

Outcome: I get many images with different sizes of the watermark, this is because the PPI is different I figured out. Now all I'd like to know is how can I get the same size watermark on all images without changing the PPI?

I have about 700 RAW images I want to batch process through PS.
All I want to do is reduce their size from 5184 X 3456 to 900 X 600 @ a resolution of 150 and save as JPG files.

Since RAW files run through ACR first and there's no way to reduce images size I just run it and end up with full size jpg's.
I run the JPG's again through Bridge and select Tools|Photoshop|Image Processor and selected "Open first image to apply settings" but when I run this there is no pause to reduce the file size.
It just runs through all the images allowing me no option to "Apply Settings".

I realize I can record an action to do this and use Photoshop|Batch but I'd like to know why this isn't working.
Thanks guys.