Photoshop Signature Brush

i have a signature watermark i put on my favorite images currently i have it is saved as a psd so i open it then move it onto the image, i was trying too create a brush that done this but the writing is white so becomes transparent when i make a new brush and only the camera icon is visible, i also tried to create an action where i recorded opening the psd , moving it onto an image, i was hoping this would work but didnt , something about move brush not defined if i remember, also the brush i created turns out sort of a green color see bottom image i know there probably a simple way around it and would appreciate any help , ive attatched an image of the signature so you know where im at , its transparent i just put a grey layer behind so you can see,


Similar Content



Action Terminology -- I Need Help.

I saw this photoshop action the other day I was impressed with. I'm on the hunt for a similar Action but I'm completely lost on what search terms to use in my hunt.

I have 4 images that give you an idea what the action does. I will also use the images to help explain my confusion.

IMAGE 1 -- nothing special here -- just showing you the image loaded into PS.



IMAGE 2 -- Image 2 shows you the first step of the action. It basically gives you an outline of the image and changes the background. I would love to have the background color to be all white but all in all this is ok.



IMAGE 3 - In this image I'm showing that you can use any brush to paint in what you want to show on the image. This is where I get lost in my search. I have been looking for an action that can convert the background like you see in image 2 above and than give you the ability to paint what you want to show in the image. I have used terms like "sketch painting" "pencil painting" "painting image" "brush painting" "mask painting" but I can not find any actions that does what you see in these images.



IMAGE 4 - When you are done brushing , you can continue the action and it will change what you brushed in to look like a painting.



Ok..............I'm looking for actions that basically does the above. The two key elements of the action is how it handles the background and also gives me the ability to use a brush tool to paint what I want seen in the final results. Most actions I seen will just convert the whole image to look like a painting.........I want more control of what is seen in the final results by using a brush to paint what I want seen in the final results. What it converts to in the end isn't important but I would love to find something where I could convert the image so it looks like a painting, a pencil sketch, comic sketch, etc.

You can help me with what to search for or even better yet, if you know where I can find such actions, please point the way.

I spent 2 days on GraphicRiveer with very little luck or what I find did not provide me enough info for me to be certain I was getting what I wanted. Other than GraphicRiver, I have been googling but no luck.

Thanks

Help Probably Simple

I'm a newbie i dont know these common problems im 2 mins in on this video



and when he selects the layer mask and paints black to turn the image to normal color. my brush does nothing, nothing happens when i use a brush. here my screen idk if i have something turned off/on that shouldnt be.

Creating Car Light Trails Using "stroke Path With Brush"

Hi! I want to create some car light trails for a matte painting scene.

I'm using a "Stroke path with brush", applying Shape Dynamics so the brush size is reduced as it approaches the vanishing point of the scene (1st image).

However, when I use a Round Blunt tip (to produce a more realistic effect simulating the light trails of several cars, 2nd image), I'm not able to apply Shape Dynamics for the brush size (3rd image).

Do you know any other brush tip that could produce a realistic effect (such as in the 4th image), while also being able to reduce its size via Shape Dynamics?

Or what any other way could I achieve a similar result?

Thank you!







How To Make Paint Brush Automatically Paints Colour On Black And White Layer

This is probably an easily solved question as it was something I used to have set before I format my laptop and lost my preferences but here it is..

Before format, when I would apply the Black and White adjustment, my paint brush or pencil tool would automatically pencil/brush colour into the photo, now it doesn't and I can't seem to figure out how to revert it back to how it was. I've Googled it and can't seem to find what I'm looking for, although I think I may be just wording it wrong.

So, as below..



On these pictures I just applied black and white adjustment, hit paint brush or pencil tool and it'd inject colour in to the image, I can't seem to get that to happen anymore.

As I mentioned, someone will probably solve this really quickly.

Appreciate any help you can give.

How Do I Achieve This Dotted/sprinkled Effect?

Hi, the image I have attached has a white dotted/sprinkled effect rather than a solid color. As you can see the dots are more dense in some areas, so I assume its not a fill pattern. Is it a brush that was applied more in some areas? or is it a large transparent image with random white specks applied as a new layer to the whole image, as the effect is also applied to the font.

Brush Not Behaving As It Should

Hello Everyone!

I am facing a problem with a brush in Photoshop CS6 Portable. I'm using a Wacom Intuos Pro and yesterday I drew a picture. Today I come back to that same picture and when I select it so I can work on it with the same brush, the nuances are gone. Meaning when I give a lighter stroke there isn't an increase in opacity, like a real brush effect. The stroke is just fully there or it isn't. I'm baffled to what might be the cause of this and feel like I've tried everything so if anyone can offer any help on this issue I would be forever grateful!

Edit: I think I solved it, I turned on always pressure for size and adjusted the brush size and it seems to give me the same brush I was using (yes I'm kind of a noob, especially with tablets), somehow it got turned off I guess? I was wondering though, is it possible to extract the exact brush info & brush parameters from a drawing, by for instance clicking on it?

Photo Retouching/restoration Practice 3

I have seen this image before and we may have used it a while back. With a whole new set of players, I feel it's safe to bring it back in a new challenge.

No comments from the cheap seats on the condition of her skin. This is a lovely young woman and I would hope that we can all treat her image with respect.

I encourage everyone to give it a try even if your new to Photoshop. All participants should be prepared to explain the techniques they have been using, as we can't learn or help without some idea as to how it was accomplished.

Good luck!



Here is my 1st attempt.

edit: I start by opening the original and duplicating it and then turning off the original layer.
I create a new layer. This is the layer that I will do all of the following adjustments on.

I started by using the following tools and settings.
Healing Brush Tool - Mode= normal - Source= Sampled - Clone sample mode= Current level and below.
Spot Healing Brush Tool - Mode= Normal - Type= Content aware - Sample cloned data from composited data= Sample all layers.
Brush Tool - Mode= Normal - Opacity= 100% - Flow= 1%

This is the image (Layer A) after only using the tools above and one added Levels Adjustment Layer.



edit: I then select the uppermost layer (Levels Adjustment layer) and hit Shift>Option>Command + E to stamp all visible layers. I then name this layer A.
I highlight all other layers except layer A and the original background layer and group them. I then turn off the group.

I then start where the tutorial starts with only the layer A turned on.

Here is the image after using a skin softening technique described in this video:



Refine Edge Problem

Using CC2014, when I use the Quick Selection tool, and then
try to us Refine Edge and the Refine Radius brush, the brush
will not open. Instead, I get that circle with a slash where the
brush should be.

In the tutorials, the brush works. Not for me.

Simple setting error?

Request For Assistance To Create An Action

Hi All,

Request for assistance to create an action in Photoshop cs6 to Batch Change image background to white.

I need to batch convert high resolution product images through layer/vector mask +/or channels without using the selection tools.

Have tried to create white background layer and place original image made transparent behind ,but did not work for me.

If you can show the way for this or create and upload link to it,that would be much appreciated.

Thanks for your time.

John

Multi-color Colored Brush Effect

Hey guys please do look at this image , can you please give me a clue as to how those colorful brush effects on the top - right corner and botton-left corner can be replicated , i have seen and used also alot of amazing brushes , but this effect seem to be really cool . Thank you . Gautam.