Found a few spare $$ in the PS budget. I am always thinking to update software, with those thoughts I went and looked into CC PS 2014 ...($9.95 a month upfront..$120.00.)....downloaded the 30 day trial..I just didn't get that warm fuzzy feeling??? I said what I really need is to calibrate these monitors. After a search both here and ..out there I popped for a Spyder4 Express Should be what I NEED and will let you know what I think when it arrives in the brown truck later this week.
Just something I'd like to share, if you want to calibrate dual monitors with Spyder4 Express which states
"Simple Affordable Solution for color calibrating a single display"
So in theory you can only calibrate a single monitor, well not true!
Well here's a way to calibrate dual monitors using the same hardware, it's easy and works.
http://photoshopcs.com/cheap_dual_mo...on_spyder.html
I'm not in any way promoting the above, just bought this for my own benefit, It may work for other products and hopefully so. Just wanted to share for people in a similar situation as me.
Morning!
I was wondering if you guys would mind helping me understand how I should be setting my monitor up and which colour profiles I should be using. Bearing in mind i don't have the spare money to buy a monitor calibration setup right now i'm going to have to make do for the time being with the monitors settings themselves.
I've always felt that my images when printed out seemed darker and more saturated than they did on the screen. Thinking it was my printer I would just lighten them to the point they looked washed out and then reprint, repeating until I was happy with the print. Having recently been given a new printer it does exactly the same so I'm guessing its my monitor that might be at fault.
I'll be very honest and say that I have tried to research this on the internet but it's going over my head and there are so many different opinions I'm getting a little lost.
I thought if I were to ask for help here I could get a dialogue going and be able to ask for clarification.
Currently I'm using an iMac running Mavericks which is set to Adobe RGB (1998) under the display settings.
I'm not doing any professional work where I need to check colours with clients or anything for the time being I just wish my printed images looked more like they do on screen.
thanks in advance for any help you might be able to pass my way.
Stacy
greetings,
i have created several time lapse mp4's using photoshop cc 2014. i use lightroom 5 to adjust the exposures and then render them into mp4's using pscc2014. these are created using the ps default of 29.97 frame rate. however they play back way to fast. can someone explain step by step how to slow the time lapse's down or provide a link that explains this workflow? my time lapse's are shot with the gopro and average about 23000 pictures per sequence at 7 megapixel wide. i can not fathom how to do this in the gopro studio software and my computer just can't handle the gp software either. i seem to have stability with my LR/PS photograpers adobe annual bundle.
thank you,
tws
Please look at the background carefully , see that its brown , now look closer and you see that its not really brown , it has some rugged or rough effect , can someone please help me acheive that , or guide me how to get that effect , thank you , BTW , this is for a flyer !!
Hello all, I am new to this group. I've had an illustration produced for a client. It was rather complex so decision was made to make it tonally very similar. All well and good, however client has shared it with his customers and the comment came back that it was a bit flat. Client said change it to blue... but we all know that won't really change it - just make it blue and flat. Client budget is spent but I just wondered if there was something whizzy that could be done to add some zing to the illustration by someone with Photoshop expertise. Maybe add some kind of filter around the window frames? I have attached a low-res screen grab - really keen to hear any thoughts sharings this groups of gurus has;) CheerioJulesbunny
Previewing and selecting fonts in Photoshop has never been a slick affair at the best of times and for me Adobe's latest 'upgrade' just makes the whole process even more annoying.
I'd rather place my wedding tackle in the mouth of a lion whilst flicking his love spuds with a wet towel.
This is a stupid question really, but is there a better way to preview and select fonts in Photoshop?
I've tried the trial of TypeDNA and whilst the standalone app is pretty good I couldn't get the PS plug-in to work.
Extension manager installed it OK but for some reason it doesn't show up as an extension in PS....neither in CC nor CC 2014.
The Type DNA website doesn't appear to have anything on troubleshooting despite being crammed full of info, although I may just have missed it.
So what does every one else use/do?
Am I alone in being annoyed by Adobes latest 'Font Preview upgrade'?
Has anyone else tried TypeDNA and got the plug-in to work in either CC or CC 2014?
...Or should I just forget it and keep flicking the lions pods?
Regards.
MrTom.
Its probably me again but the 'Load Files into Stack...' script in PS CC 2014 doesn't seem to want to play.
[ With no document open and loading a list of 5 images ]
I get two documents created, one with just the last file in the list opened and the other with a blank layer, the same image as the other document and a vertical guideline way off to the left.
This works fine in PS CC but not in 2014.
(CS6 works ok too)
Can anyone just confirm if its me or if it really doesn't work in 2014.
Many thanks.
Regards.
MrTom.
Hi Everyone,
I was wondering if someone could please help me out. I do not have Photoshop, so I just downloaded GIMP tonight. I am beginning to learn the ropes but would really like a photo edited in the mean time.
There is an annoying pipe in the 2 attached photos that I would like to be removed, if possible. If anyone can spare a few minutes to remove it that would be awesome. Also, the lion in the first picture doesn't seem to be as rich in color and/or in focus as he is in the second picture, so if a certain effect (the picture seems "whiter" than the 2nd, so maybe it's too bright?) can be used to help him stand out that would be great. I trust your opinions/suggestions, so if you want to mess around with it and add certain things please do. I'm sure these two edits are very basic (item removal and sharpening/adding color to an image), so I hope to learn how to do it in GIMP within the next few days.
Thanks so much
Hi.
This is my first post here, I'm French, so excuse any English mistake i may do.
I'm not an artist / designer / ..., still new about using image software editing like photoshop.
So i downloaded Photoshop CC to try it because i wanted to do something on my spare time.
I want to render digitaly a card collection based on a online Collectible Card Game (Duel of champions if you wanna know).
For this I downloaded their card art from their site.
Then i want to add several effect / filter to render them nicely.
So i read and watch many tutorial in this purpose.
I ended with a good result for 1 card.
Here is an example :
So what i did :
I get a source card art image, adding its red border, embossed it to get relief, adding a gloss effect in 3 different layers (the card art, the border and the gloss effect). Than i duplicate all this layers, swap them vertically and moved down to get a reflection.
I added a gradient to this new group of layers to have a nice fading effect to the reflection.
As I do not want to redo all the process again and again if I change main the source card Art, I want the reflexion to automatically update.
This was done using Smart object, both main source card Art and the (vertically swapped) reflexion card art using the same object storing my different main source card art.
So when i change in this object the main source card art used, it automatically change both the rendered card and its corresponding reflexion.
And then i Added a displacement filter to simulate a water reflection.
And the first problem (solved by now) occurred :
If i want to apply a filter to the group of layers corresponding to the rendered reflexion card, Photoshop have to convert and merged the whole group of layers into another new smart object and then apply a smart filter onto it. That worked but i lost the auto updating of the reflexion as the previous conversion have made Photoshop create in fact a whole new duplicated object storing a my different main source art.
So i partially resolved This by using Smart LINKED object instead of Smart object. I say partially because it is not really fully automated anymore.
Now if I change the main Source card Art to render a new one, I have to "manually" save file / update smart object to get the reflection updated.
I kinda accelerate this using a action performing a batch of saves to get a "save all" options (that clearly miss in photoshop). But for this i still have to open all my smarted linked object in order to apply the "Save All" batch.
But know I want to generalize the process to cards left, and render my whole card collection.
So i created a template based on what i've done so far using in this template Smart LINKED Object for the Main source card art and the reflected one. By the Way I exported the Reflection group in a PSD file, and refered to it as another Smart LINKED Object in my template. Doing so i'm sure Photoshop no more use a temporary PSB object correspond to the converted / merged reflexion Smart Object (remember : created in order to apply a smart Filter on it).
So what Happen now ?
I create a new testing psd file in witch i embed several new smart objects each one is an occurence to my template. Here i have to used smart Object and NOT smart LINKED Object because if so i'll always end up with the same rendered card several times. I have to get Phososhop create it own temporary duplicated object so a modification to one don't affect all the others after "Save All" batch on the corresponding working card.
So with what I have now, if I want to change 1 of the rendered card, i go its corresponding (duplicated) template object and from there i access again my LINKED object storing all my main source card Art.
I change to what source card art I want, and I have to open the reflection smart LINKED Object too in order to apply the "SAve All" batch.
Here is the "fun" (issue) thing : I have to apply the batch 3 time in a row to have the rendered card changed in my main testing psd file. I suppose saving 3 time time propagated the change along the Smart LINKED Object chain.
AND I have to make sure ONLY the corresponding smart (LINKED) Object file are opened before. If another file from a different rendered card is opened too the change will also be propagated to it and so having a duplicated rendered card. (I only want each card rendered once, but using the same template to avoid repetitive work).
So I explained in detail, but maybe not clearly, my situation and the step i went through.
TLDR
To summarize : I have a collections of Card art (jpeg).
I created a Template applying effect to render 1 card.
I created another template appliying same effect to render 1 REFLECTED card.
In both i use the same Smart LINKED Object that Store my collection on Card Art.
I make another Smart LINKED Object in the first template that reference the second one.
So with my first template I can update the rendered card and its rendered reflexion after changing the main source card art in the subsequent smart LINKED Object that store my whole cards art. I have to had all corresponding Smart LINKED Object file OPENED and save them all to have th updated result.
So not really automatic.
Then I want to render my whole card collection with effect and reflexion.
I create in my project a duplicate of my first template for each card to be rendered.
Then I have to open ONLY all subsequent corresponding Smart LINKED(or not) Object file of current working rendered card and change the main source card art, save all the file (several time to propagate change) to properlly update the current rendered card.
I have to do this for EACH of my duplicated template in order to render EACH of my cards.
Definitively not automatic process, and prone to errors.
Do you know a way to fully automatically render my card collection ? The only thing I want to do is chose one time the main source card art for each rendered card.
Finally another way to explain this issue and maybe get an answer is to instead explain simply what I want to do :
I have a collection of (jpeg) card art from an online card game.
I want to render them all with effect (gloss, emboss border, faded and water filtered reflection).
I want to do this automatically.
The only thing i manually want to do is chose the card art to be rendered for each of the card i want to render in my collection.
Here is an image of what i want based on what i've, not automatic, done so far :
Thanks for any help from photophop professional here.
yesterday i posted a pic and asked for a plate number off the truck that stole my bike...i feel like you guys can help..i got a better photo and was hoping you can do anything at all with it