This must be PS 1 - not PS101 900 pages of PS books - can't find the answer.
Thanks,
Qwerky
Hey all. I'm trying to recreate the blur effects of the logo(s) used for the Tate Modern.
The logos:
The topic has been discussed befo
http://graphicdesign.stackexchange.c...o-in-photoshop
One of the solutions suggests using gradient masks, feathering and adjusting the curves. This works but falls short of achieving the more exaggerated effect of for instance the last two photo I've posted above. Are there other things I can do to bloat/obscure the shape of the letters? I also want them to still look like there going in/out of focus.
In addition I've had trouble with the gradient masks:
As you may be able to see, part of the text (diagonally across the middle) is masked over slightly. The idea was to create two complementing gradient masks so one masks over the top left one layer, one masks over the bottom right of one layer so when the layers are placed on top of each other it creates one seamless, solid color. I thought I could do this by copying the gradient mask of the first layer, moving it to the second layer and inverting the colors, but as you can see a grey area appears, where the two fading gradient masks seem to overlap. Here is the text with the gradient masks disabled:
Also the original typeface they used is supposedly VAG Rounded.
Thank you so much for your time!
Hi all!
We're using photoshop to prepare assets for a game engine, and i'm trying to find a good workflow, which i can then teach to my artist.
At this point, i have an image with five layers. 12345
Layers 2-5 each have a layer mask on them.
Now what i want to do is, copy the layer mask of layer 2, and paste it into the Red colour channel of layer 1
then mask of layer 3 into the green channel of layer 1
layer 4 into the blue channel
and layer 5 into the alpha channel
So the result is that the channels of that layer will each look identical to the layer masks, and thus layer 1 will look like a wierd (but programatically meaningful) mishmash of colours.
I'm having some problems though.
Apologies for the massive image.
This is the green channel that i've gained from the above procedure. The big gradiented circle in the middle is what i made, but for some reason i have this white stripe down the left side too. I have no idea what that is or why it's there. It appears on both he green and blue channels when i paste in a mask. But if you look at the channel image in the right hand panel, it doesn't seem to have a stripe down it.
the stripe is definitely there, it's affecting the main image, and its annoying me.
any thoughts what might be causing that?
I have seen this image before and we may have used it a while back. With a whole new set of players, I feel it's safe to bring it back in a new challenge.
No comments from the cheap seats on the condition of her skin. This is a lovely young woman and I would hope that we can all treat her image with respect.
I encourage everyone to give it a try even if your new to Photoshop. All participants should be prepared to explain the techniques they have been using, as we can't learn or help without some idea as to how it was accomplished.
Good luck!
Here is my 1st attempt.
edit: I start by opening the original and duplicating it and then turning off the original layer.
I create a new layer. This is the layer that I will do all of the following adjustments on.
I started by using the following tools and settings.
Healing Brush Tool - Mode= normal - Source= Sampled - Clone sample mode= Current level and below.
Spot Healing Brush Tool - Mode= Normal - Type= Content aware - Sample cloned data from composited data= Sample all layers.
Brush Tool - Mode= Normal - Opacity= 100% - Flow= 1%
This is the image (Layer A) after only using the tools above and one added Levels Adjustment Layer.
edit: I then select the uppermost layer (Levels Adjustment layer) and hit Shift>Option>Command + E to stamp all visible layers. I then name this layer A.
I highlight all other layers except layer A and the original background layer and group them. I then turn off the group.
I then start where the tutorial starts with only the layer A turned on.
Here is the image after using a skin softening technique described in this video:
I used to know it but can't remember anymore and after a long search online, still can't figure it out.
Ok, I have a bunch of layers and I want to make a lasso selection on the top layer and then use whatever the correct keyboard shortcut is to make a new layer with a merge of all the underlying layers made in the lasso selection area.
I know I can cntrl-alt-shift E and stamp a new layer on top of the stack with a merged version of all the layers below and then make a lasso selection and cntrl-J that to a new layer, then delete the cntrl-alt-shift E layer...but I would like to save the step of having to make the merged layer first. There is a keyboard short cut for this but I just cant find it.
Any of you pro's have the answer to this? Would really appreciate it.
Thanks!!
Hi,
I have a photo of a girl and I want to select her. That works fine. However, she has her hands on her hips and I also need to select the area from her shoulder to her hip inside where her arms are so that part of the background will also be cut out.
Can someone please tell me how to do this? I've looked in all my books and searched this forum and can't seem to find an answer.
Thanks so much,
Marg
Hi! I'm new! I'm creating a composite image of 7 faces. They are each on a different 'Normal' layer. I want them to all be represented equally but the top layers are more prominent than the bottom. How much do I have to adjust the opacity levels to change this?
I know I can use 'multiply' to achieve this effect but I have to do it using 'normal'.
Any Advice?
Thanks
Hi Guru's
I am fairly new to PS and currently using PS6. I have recently discovered the luminosity mask and am working on this with my chosen genre Wildlife/Nature/Landscapes. I have created the masks (vrun via an action) as you can see from the attached screen capture and things were running smoothly. I was creating different masks as required now for some reason as you can see from the screen shot in channels my RGB and Red Green and blue channels are fine but my masks are either now black and or white and when trying to load I dont and cant get my masks to show (marching ants) what have I done wrong? have I ticked something I shouldn't have? was working perfectly well and the current action works well on my PS5 copy so I am stumped.
Can you gurus help its driving me nuts.
Regards
Limpopoboy
Hello everyone, I'm fairly new to Photoshop CS 5 so I apologize if I am asking the wrong type of questions, here goes:
When working with Vector Masks can you:
1) "Link" or "share" one image's vector mask with other images? (ex. If I made "Building A" then duplicated it, but then wanted to change what Building A looked like, I would only have to change the source mask and the copies would be updated.
2) Move the image independent of the vector mask (it seems like I can only move the vector mask, not the image itself). Or in other words: can I move the image and have the mask follow it, instead of only being able to move the vector mask inside of the image boundaries?
My application of the question:
I'm making a 2D top down layout of a "city block" type area. To fill in the buildings, I've made Building A,B,C etc, and use multiple copies of each building. Ideally, I would like to be able to "link" or share say Building A's vector mask with all the other instances of Building A (so that when I change the master, they all change to the new mask shape). The second behavior I'm trying to find is the ability to move the layer without moving where the Vector Mask is on that layer (since it seems that you can only move where the mask is, meaning that even if I could share masks, they would all end up in the same place meaning I would have to re-position each one by hand again.
Any ideas are appreciated, thank you for reading.
Hi
I have a file with 760 layers plus a background that is a photo. The layers are rasterised smart layers from Illustrator
I have a task by which I have to have the background always visible. I then make the first layer visible as well as the background and then save for web and devices. Once one I turn that layer off and then turn the next layer on and then save for web and devices. 760 times Oh God!!!!
I know I can create an action and even a droplet from the action the issues I have is how do I tell the action to turn the first layer on and then optimize the resultant image and then turn that layer off and then move to the nest layer and so on through the 760 layers
Any ideas would be great
Thanks
Hi All,
Request for assistance to create an action in Photoshop cs6 to Batch Change image background to white.
I need to batch convert high resolution product images through layer/vector mask +/or channels without using the selection tools.
Have tried to create white background layer and place original image made transparent behind ,but did not work for me.
If you can show the way for this or create and upload link to it,that would be much appreciated.
Thanks for your time.
John