Hi Guys,
I have attached a .psd file, what i need to do is add a 1% min dot to the PMS 382 in the background but have the CMYK images knock
out of the spot colour. Everything i do leaves the 1% in the CMYK areas as well...
Any help would be greatly appreciated.
Thanks Duncan
Need to convert a CMYK+Spot EPS file to a CMYK+Spot TIFF. I have been reading what I can about the process, but must be missing something. I was able to create a new file with the exact same pixel dims and copy the channels into the new file. However, it is not quite right. Is there a clear cut tutorial somewhere that can help me?
Thanks!
Hi there!
im having an issue when I convert my photo to CMYK from RGB in photoshop.
The colour loss is huge, which is a shame but something I can adjust, however the other issue is that it's actually losing a lot of the detail with it. It's giving it the kind of effect you have when you whack the gamma up, almost like a solarised/white layer overlay effect or something. I've tried with the original and the flattened file but the results are similar.
The image may potentially be blown up to bus ad type size so it's really important the detail is still there.
Is there any cheat fix to this or perhaps something I'm missing?
Any help would be hugely appreciated!
I have a load of images that I have been given by a manufacturer, some have white backgrounds and are great. Others, have a black background..and are not great. I am needing to edit these black background images to be like the white background images.
You'll notice for the product (attached images) that there is packaging immediately around the yellow string. It's this bit that I am finding incredibly hard to change from the blackish colour to the whitish colour, shown in the picture with the white background.
Does anyone have any ideas please how I can change this black area to be like the 'good' photo? Any help is greatly appreciated.
Hello guys, i'm have a little trouble to print a folder of my company.
I hired a guy to make the folder, but he backed out of the deal.
The folder is already completed, i'm just having issue with the printer company.
My background isn't in the right black composition in cmyk.
How do i change the actual RGB gradient of my background to a CMYK with ONLY K color making the gradient??
Any idea?
Here's the print of the last page.
Hi,
I have a colour image of a scene and several greyscale images of similar scenes.
I would like to use the colour information from the colour scene and add it to the greyscale images,thereby making them colour also.
I am sure there is more than one way to do this, but the way I imagined it would work was to some how sample all the colours and then map them individually to the 256 (or more ?) grey levels.
The colous wouldn't change because I would choose a 'standard' image but the greyscale images would all be different.
I have tried searching the net for info but I don't think I am entering the correct terms, so any guidance would be appreciated.
thanks.
Hi,
I am very fond of Colour alterations on a photo through manipulating RGB or CMYK channels. I recently stumbled upon a method that gave a rather very interesting colour effect I think. I deleted the blue channel out of my RGB image, that left me with cyan and magenta channels. However the problem is that I cannot save that image with the usual formats such as PNG and JPEG. I can only save it as PSD and a bunch of other technical formats. I suppose it is because a channel is missing. I have tried to fill the blue channel with black but that did not give the same effect. Is there a way to save the image with that colour effect, or somehow achieving the exact same result through a method without deleting a channel?
I'd really appreciate your help. Merry Christmas and happy new year.
Hi Guys,
Im new to the forum and have a tricky question.
Ive been given a large amount of designs that have been colour separated for use by screen printers.
I will go through the image details below but history of the images is sketchy to say the elast.
The layer shows a black and white image and has been saved in grayscale mode.
There are numerous colour channels which are unselected. When you select them all the colour fills in gradually until its looks great. But this doesnt actually change anything eg Layer, so that is always black and white.
How can I get the printed output to look like the image when all colour layers are selected.
Im not screen printing, I am digitally printing so dont need sep colours.
I have attached an example design so you can understand better what I mean.
Any help will be massively appreciated guys.
If I can find an easy way to do this I will hopefully get a script designed that will convert 100s in bulk. Fingers crossed as right now Im lost.
Thanks guys
Neil
Probably a bad subject title so let me explain what I am trying to do.
I have a very basic image (screenshot 1). Trust me, this is not an exercise but similar to the image I will be using,ha!
I select each white circle and using smart erase I can erase each circle (screenshot 2) but I want a feathered/gradient effect like (screenshot 3).
Then when I add a background color it gives the effect I am after (screenshot 4).
So here is the issue - Each image will have 100's of white dots and they will be random on each image (sort of like a star field would be a good comparison). So I need to find a way to perform the same procedure all at once on all the dots (preferred way I would think), sort of like using smart erasure but with a feather effect, or need to create an "action" that will do that.
So I guess my questions a
1. Can one create a gradient that goes from "eraser-to-black", and then save it as a mask? (to use for question 2)
2. or perform the same task on each selected spot at the same time using a mask or
3. If I need to create an "action" for this how would one move from one spot to the next to perform the task on each spot?
Since I am new here I am beginning to search through the massive forums here but thought I would throw this out will I keep searching. Thanks so much.
Clutch
Long story short...I need a way to quickly drag multiple images to my canvas and put them in certain places without any of them overlapping each other. At the moment, when I select multiple images and drag them onto the canvas, they all sit on top of each other right in the middle until I go to each layer and move to their own space.
Is there a way I can automate the images to go to the correct position? Having to go layer by layer doing that manually takes a lot of time when I have 20+ images per sheet so I'm hoping there is a quicker way. I'm well aware of actions but not sure how I can use that to place images to different parts of the canvas. As far as I know, creating an action will put each image on the same spot of the canvas but hopefully I'm wrong about that and someone can show me the correct way of setting it up.
Can somebody using PS CC or PS 2014 please confirm whether the file names are correct for split channels.
Procedu
1. Open a file, (must be flattened if a layered PSD).
2. From the Channels Panel Fly-Out menu choose 'Split Channels'.
3. The file names of the resulting documents should be:
For RGB or CMYK file 'butterfly.png':
butterfly.png_Red or _Cyan
butterfly.png_Green or _Magenta
butterfly.png_Blue or _Yellow
butterfly.png_Black
My results a
AR_Red
_Green
A_Blue
These results are the same for every file I've tried. The original filename is totally disregarded.
Is this just me or is it PS CC and PS 2014?
Your feedback is appreciated.
Thank you.
Regards.
MrTom.