Eyedropper

Hi, I have a doubt about eyedropper. I work with a lot of layers, and sometimes I want to pick the "All Layers" color, and others only the color in the current layer...

I have seen here http://blogs.adobe.com/jkost/2012/06/the-eyedropper-tool-additional-sample-options-in-photoshop-cs6.html that CS6 can do the job, but I don't find the way to do it (And I have googled a lot).

Thanks folks!!!


Similar Content



Replacing Color With Specific Color Code

I am trying to replace the background color of the image below. I am using the replace color tool. I use the first eyedropper tool to select the color. Then the second eyedropper+ tool to select the shaded area. I use a fuzziness of 50-70. I enter the replacement color using a color code. The color is replaced, however the final result is a slight different color than the color code I enter. When I check the end result using the eyedropper tool, I can see a different color code. Why does this happen? What other method can I use to replace the color with a specific color? Thanks

Extracting Color Samples

Hello,
I am new at this so thanks for helping me out. I am making a fiber art portrait from a photograph. I need to duplicate the colors in the photo with fabric. I know in Corel you can select the eyedropper, click on the image, and produce a sample of the color to then print out and take to the fabric store to match. I have spent the evening trying to do this in Photoshop. I have used the eyedropper, used the 3x3 pixel, get the circle with the color, but cannot figure out how to drop them somewhere to then print out to take to the fabric store. Is is possible to do that? Any other suggestions if not? It's a total of about 6 colors as I have applied the Posterize feature. Thank you.

Converting Image To 3 Layers For Silk-screening

Hello! I'm making a poster for silk-screening. Each color needs to be on a separate layer so that each color can be hand-printed one at a time. Foolishly, I did not draw the colors on separate layers. I need a layer for the white outline, a layer for the purple, and the remaining layer the black (which will just be the color of the paper for those familiar with silk-screening). Posterizing doesn't seem to work, and selecting color range doesn't seem to nail it exactly either. I would greatly appreciate any help.

I am attaching the PSD file. Please do not reproduce this image (though i don't know why anyone would!)

Merging Layer Styles Not Working As Expected

Hi folks, newbie to the board. I'm using Photoshop CS6 and have hit an issue that I can't get to the bottom of and was hoping someone could help.

I've completed an image for a client. The original involves many layers, and I have got to the point when I want to merge everything down into a PDF for them to send to their printers.

Problem I am having is that when I try to directly save as a PDF or merge down the layers in a copy of my main PSD file, I am losing certain layer styles.

I have tried creating a blank layer below an offending layer and hitting CTRL + E, I have tried creating a blank layer, hiding all but the offending layer and blank layer and merging visible, I have tried Layer - Rasterize Layer Style, I have tried turning the layer into a smart object and then rasterizing (I lost the layer style as soon as I turned it into a smart object, even though it is still present in the smart object itself), and I have tried turning the layer into a group and merging the group. I have also tried saving the file in a number of different formats to no avail. I don't know what else I can try and why none of this has worked! I've also tried right clicking on the FX in the layer palette and chosen "Create Layers" at which point I get a dialog: "Some aspects of the effects cannot be reproduced with layers", and I get the same result. Most noticeable style that disappears is the drop shadow.

Weird thing is this isn't the case for every layer. I've particularly noticed it happens on text layers that have been text warped. However I've tried rasterizing them before trying to merge and that hasn't helped so I can't see how that is the problem.

I hope someone can help, I am totally stumped. If it makes a difference the mode is CMYK Color, 8 bit.

James

Question On Copying Part Of A Layer Fx

I had a situation earlier where I had about 50 layers, each with there own specific layer fx, but then I wanted to add a color outline to all of them.

Now, because the other fx are all different, is there a way I can just copy the stroke to all layers, instead of entering every layer, one by one, & setting it manually.

Auto Blend Layers Stack Image Option In Photoshop 3

I have several images in different layer in PS3 ( macro images with different points of focus).
I have aligned all layers ok, but when trying to blend the layer (all layers selected) using the auto blend layers tools, the tool does not give me the stacked images button.
Instead it launches straight into the process.
The results are not what I am expecting, each layer bar one has a totally black mask, and the image is not a blend of all the images.
All tutorials for the process using CS3 show a button for selecting "stack images" mine doesn't.
Am I doing something wrong?
Please help as I am going mad with it



Photo Retouching/restoration Practice 3

I have seen this image before and we may have used it a while back. With a whole new set of players, I feel it's safe to bring it back in a new challenge.

No comments from the cheap seats on the condition of her skin. This is a lovely young woman and I would hope that we can all treat her image with respect.

I encourage everyone to give it a try even if your new to Photoshop. All participants should be prepared to explain the techniques they have been using, as we can't learn or help without some idea as to how it was accomplished.

Good luck!



Here is my 1st attempt.

edit: I start by opening the original and duplicating it and then turning off the original layer.
I create a new layer. This is the layer that I will do all of the following adjustments on.

I started by using the following tools and settings.
Healing Brush Tool - Mode= normal - Source= Sampled - Clone sample mode= Current level and below.
Spot Healing Brush Tool - Mode= Normal - Type= Content aware - Sample cloned data from composited data= Sample all layers.
Brush Tool - Mode= Normal - Opacity= 100% - Flow= 1%

This is the image (Layer A) after only using the tools above and one added Levels Adjustment Layer.



edit: I then select the uppermost layer (Levels Adjustment layer) and hit Shift>Option>Command + E to stamp all visible layers. I then name this layer A.
I highlight all other layers except layer A and the original background layer and group them. I then turn off the group.

I then start where the tutorial starts with only the layer A turned on.

Here is the image after using a skin softening technique described in this video:



Exporting Layers Separately

I have Photoshop CC and I loaded a PSD file into it with many layers.

Somebody created the PSD design for me.

I am trying to export all layers separately but when I go to Scripts >> Export Layers to Files, it kinda mixes a particular layer with all other layers.

So I can never get a layer on its own.

Have a look at one of these export below. The top shade should be on its own, but its accompanied by the bottom layer also. Every other file is also accompanied by the bottom layer. Any idea how I can just export all layers on their own?



Any suggestions?

JH

Need Help With Knockout Blending

I've just discovered the existence of the Knockout feature in the Layer Blending Options. If you select Deep Knockout it allows your current layer to bypass all intermediate layers below it and instead blend only with the original, bottom Background layer.

I tried a few experiments and got Deep Knockout to work, but it only seems to work if the original background layer is present and intact. If I delete or rename the background layer, or substitute something else as my bottom layer, the Deep Knockout doesn't recognize this new bottom layer as the "Background" and drills right past it down to emptiness---an entire screen of blank pixels.

How do I take the bottom-most layer of my stack and redefine it as a Background, so that Deep Knockout will recognize it? (Also, I've never understood why Photoshop even bothers with the background layer, what special properties it has, and what advantage it provides vesus any other "normal" layer that sits at the bottom of the stack.)

Thanks

Action To Copy Color In Layer Mask To Another Layer Mask

Hi all,

Having trouble with this problem...

I have layer 1 with a color mask set to black, red, blue etc.
I have layer 2 with a color mask which i want to match and also become black, red, blue

There are hundreds of files, and the color in layer 1 is always different.

Manually i would simply click on the layer 2 mask which opens the color picker, and select the area of layer 1 i want to match.

But doing that in a macro does not work.

I can't get a macro to recognize that i want to copy the color content of a mask, and not the specific color used in the example during which the macro is recorded. The color picker does not seem capable of selecting a dynamic input (e.g. whater color is on layer 1), it simply copies whatever was in layer 1 during recording like a dumb instrument.

thanks for any input.