Resolution Issue - Project Set Up For Large Billboard

Hi Photoshop Gurus


I have been working on a billboard 414cm x 230cm and i have on 4000x6000pix image from a fullframe canon 5dmkii filling up the whole billboard.


What is the best way to save the image for billboard printing + preserve vector lines and text on top of the image?


(i have worked with the plugin perfect resize to scale up but don't like the results)


Now i make a psd. 1to10 (all smartobjects) and then save it as 3000dpi instead of 300dpi so the file is 10 times as big when printed and therefore full size. This way make the pdf's much smaller instead of making 1to1 resolution then i have to save as tiff since the file is over 2gb (can't save as pdf when to big) and the result is actually not as good as the pdf when i review the exports.. + 1to1 is very slow to work with since the files turn into 8gb psb and can be saving/loading for 30-60min sometimes.




<b>Would like to hear your opinion on this billboard printing? What is the best method to get your design from screen to 414cm x 230cm billboard without any bad surprises in the printing.
</b>


The printing company wants the file in TIFF, psd, pdf,ai. My impression if pdf work with everyone so prefer to go with that, of no benefit with other formats.

Plan on printing some large format Chromaluxe white gloss aluminum prints

Using a vendor/trade printer I work with just outputs what I upload

My issue is I am using images from 20 mp camera, believe files are about 5500 pixels wide so decent resolution but vendor wants 300 dpi at actual size which would equate to only about half the size I wanted to print
Looking to print as large as 36" x 24" but at 300 dpi my source file is about 18" wide
Started as RAW files

Since most cameras I think produce images in this range, I imagine this is a common issue. What would you do

Not place this order
(This vendor only has large sizes for the 3:2 ratio I desire)

Have photoshop up sample to 300 dpi or 240 at least using their tools?
If so which one of the options in photoshop do you use?

Submit my lower resolution files as is and hope for a good result

Thanks

I'm having a design done for a 5 x 2 paper label. Here is what the label company told me,

Just ask your designer to add 1/8" bleeds on the graphic file size. If you are ordering a 5" x 2" , the graphic file's size should 5.25" x 2.25".

I printer out the design on my own printer, and the size is indeed about 5.25 x 2.25

I guess I'm confused about bleed. To compensate for bleed on a 5 x 2 label, shouldn't the file size be smaller, like 4.75 x 1.75 ?

Wouldn't a 5.25 x 2.25 file size print well over the actual label?

Thanks.

Hello,

I am completely new to this forum so I apologize if this is posted in the wrong place. I am using Adobe Photoshop Elements 9 and have a question regarding file size/quality. So, here it goes.

I am currently working on publication that requires all downloaded photos to be uploaded to a website that has a max file size of 20 mb. When I download an image to use for a background (some sort of a pattern that is normally somewhere around 800 x 800 size) the image is about 180 kb which is perfect. Unfortunately, the image has a poor ppi resolution and prints extremely blurry so in photoshop under image size, I increase the resolution so that the file size & resolution is bigger. This takes a lot of guessing on my part.

For example, if I increased the image resolution to 100000000 ppi, the file size would end up way over 20 mb which does me no good. So what I am wondering is, is if there is a way to optimize the the resolution of the image, given the file size limitations, without all of the guess and check?

If this looks confusing, I apologize and will gladly explain more. Any help would be greatly appreciated.

Hi Folks,



I'm ready for printing but don't understand the correct sizing in PS,Staples uses Publisher so they can't help on the file size. When trying the 11x17 Dimension poster size I get a small thumbnail box,After zooming to 3200 and copying everything over it's awful & fuzy.





3200%^^^

Not really sure how to figure out the correct Height x Width or what's wrong.

any help is greatly appreciated

Hi!
I have a dilemma with a high resolution picture that I want to use on a large screen. The problem is the screen has a low resolution which seem to distort the picture sometimes. Also I would like to zoom in the picture.

The monitor is a 47 inch HP LD4720tm sporting a 1,920 by 1,080 resolution. So the resoultion is like an ordinary desktop monitor but the size is more than double that. In other words, the pixel density (ppi) is much smaller.

The picture is of a clock. Size is about 670X670 pixels. I cropped out this clock from a larger 12MP Raw format Nikon picture. The cropped out clock looks something like this (my real image is copyright protected but this is very similar with 700x644px):


(http://www.stanleylondon.com/ClockShipsBellSml1.jpg )

On the screen this picture should take up a fixed size of 170X170 pixels (ie about 10% of the monitor).

The first way I did this was to simply in Photoshop Elements save the 670X670 picture as a png and with dimensions 170X170 pixels. ("Save for web" to get it as small in size as possible and chose png and 170X170). Then I put the 170X170 pic on the background canvas. It looks very nice. However, when I zoomed in the numbers and other details look very jagged or blurry.

So now I tried with the larger resolution 670X670px. I put this on the background too, and as it should only take up 170X170px, I clicked it and dragged to resize it. But this picture looks much worse than the 170X170 pic. I suppose the 170X170 pic perfectly fits the 170X170 space while the 670X670px is distorted. I mean, for the 170X170 pic there will be one pixel for each monitor point. When I do the exact same comparison on a 21 inch 1920X1080 monitor they look equally good, so it must be due to the low pixel density of the 48 inch monitor where the human eye can see each pixel.

However, now when I zoom in the details for the 670X670px were clearly visible.

I tried a few other resoultions like 360X360 and 270X270 (I resized the 670X670 pic to these sizes) and both png and jpeg. They also looked worse in normal view but of course in zoomed view they displayed more details than the 170X170 pic.

My dilemma now is how to get an image that will look good both when zoomed in and when in 100% zoom (normal view) on this large screen. Is there a way to do this. Eg like resizing to a resolution larger than 170X170 that will also look good in normal view.

Thanks.

Good Day/Night to all,

I'm here to ask a quick question. When using Photoshop to design a Tshirt for example, an all over Tshirt and you have the image size set to 300 resolution 26 Width, 29 Height and 7% zoom. Do I have to change the zoom to 100% to see how the design will actually look in person?

Hi everyone,

I would like to ask what is the Resolution for a Standard ID size for a company. I am using the size 2.103" x 3.38" and 72 resolution pixels/inches, I don't know if this is correct cause it seems very small.

Please give some advice.


Thank you,
efasde

I have about 700 RAW images I want to batch process through PS.
All I want to do is reduce their size from 5184 X 3456 to 900 X 600 @ a resolution of 150 and save as JPG files.

Since RAW files run through ACR first and there's no way to reduce images size I just run it and end up with full size jpg's.
I run the JPG's again through Bridge and select Tools|Photoshop|Image Processor and selected "Open first image to apply settings" but when I run this there is no pause to reduce the file size.
It just runs through all the images allowing me no option to "Apply Settings".

I realize I can record an action to do this and use Photoshop|Batch but I'd like to know why this isn't working.
Thanks guys.

Hallo everybody,
I didn't understand how copy a vector layer from a document in an other document. Same thing about a selection: how to copy it created (and saved) in a document - to another document?
I mean when both document are opened..., of course.

Thanks for a reply.