Opening List

I have a single smart object which will act as a texture layer. This texture layer is linked to over 100 documents, when I want to put a new texture in this smart object I save it then open up 1 of the 100 documents, it has the yellow warning symbol and I have to click "Update All Modified Content".

My question is , is there a way to automatically update the content so I don't have to open 100 documents and click update on each one? I thought the whole point of a linked smart object is so that it saves time by not making me open up each document and clicking update.

If you know for certain that this is impossible then also let me know so I can stop searching.

Many Thanks
Tom

Hi Gurus,

Programmer here. I've been asked to do technical spec brochures for the company. Considering I'm not good at photoshop at all, I'd like to do automate as much as possible and have to do the least amount of manual work possible and make a template completely reusable.

I need these automated parts :

- Image of product easily replaceable
- List of specs easily editable
- Can add tabs and highlight one of them in order to show what category of products you are viewing (additional explanation : say, if you were looking at a product related to video surveillance you would have the tabs "cable", "camera", "recorder"; if you were looking at a product related to computers you would have the tabs "HDD", "processor", "monitor", "accessories"). The individual tabs must adjust their length so that the tab bar stays at constant length
- More generally, I want the individual visual elements to be able to adapt to different dimensions to keep the general look of the page aesthetic

And I need these constants :

- Logo and address at the top
- "Specifications" subtitle
- Tab bar is of constant length

I have an idea on how to program it with vector graphics in Java but it seems like an overcomplicated solution for this task. Is there a way to do this kind of task in Photoshop ?

I've merged the original exposures into a panorama using PS's photo merge tool, and then used the Adaptive Lens filter to straighten it out. The merge gave a cup shape to the horizon. The Adaptive Lens filter wasn't as easy as expected, as just marking the horizon was not working and I could find no way to tell it that the projected line it drew was not following the right curve! But I found that making a bunch of overlapping small lines did the trick.

So here's what I have now:

Before I work on color, I need to get the composition right. The distant horizon is straight, and the change in features on the left is a natural place to have a bend, but maybe the distant horizon ought to be a bit curved after all? I'm open to suggestions.
The near space is too distorted and doesn't match, but having the feature provides for the opening up of the distance beyond it. But maybe it can be shaped or modified somehow?

Any suggestions or discussion on what I should do next?

Also, I've found that PS will not save a file if it runs larger than 2GB. A more enormous merge could not be saved with layers intact. This thing is already pushing 2GB, with one "smart" layer + the lens filter and a vibrancy adjustment layer.

I have a problem with photoshop. Everything I do gets pixelated.

When I paste or place an object from Illustrator CS6 I choose place as smart object and as soon as I pace it it gets pixelated. I have tried with and without the anti-aliased box checked. When the box is checked photoshop pixelates the image and when the box is not checked the image looks really strange and digital with the pixels showing. All curves that were smooth and nice in Illustrator looks jagged and strange.

When I try and draw a shape in photoshop it looks in the layer-list like it's a shape layer but the object is heavily pixeled.

I have tried opening a file created in Autocad (by using dwg to PDF) and opening it as a smart object in Photoshop. Everything is pixelated.

When starting a new file in PS I have a 300 pix per inch resolution, 16 bits RGB color, sRGB IEC61966-2.1 as my color profile and square pixels as my pixel aspect ratio.
Under general preferences I have the box for "Place or drag raster images as smart objects" (I have also tried without it). I have also tried with the box for "snap vector tools and transform to pixel grid" on and off.


Regardless of what i do photoshop still pixelates everything. I have no idea what to do. Could there be some sort of setting that I have overlooked?

Hello, I am looking to fix the barrel distortion- fisheye effect of photos taken from my quadcopter. From the altitude, the lens distortion is very pronounced.


So, within Photoshop CS6 went to "filter" Menu -> Lens Correction ...and under "Auto Correction" -> "Camera Make" Gopro does not appear in the dropdown list like it does in the online videos I have found to correct this.


..What gives?

I am trying to "coat" an image in a translucent color in order to make Text accross the image to stand out. All of the instruction that i have found thus far is either out of date, or to assuming of my photoshop knowledge... PLEASE help, its for my wedding this weekend and im getting exhausted trying to finish all of the details

Hi,
I'm wondering if this is possible:
The right side is what I'm trying to achieve.
It's a simple enough effect, but the problem is that I'm curious if it can be some sort of dynamic effect in that I can change the "A" text to "B" and still have the outline cut out of the "M" (Or whatever if I need to change the "M" text to "Q" or something).
Basically I need the "A" and "M" to be able to change while the stroke of whatever the "A" letter (or shape) is will always cut out whatever shape, text, or image is placed behind it.
Is this possible without having to manually cut it out of the back image every time?

The illusion can easily be created by having a white background and using a white stroke on the "A" (that creates the effect I'm wanting)..
However I need them to be transparent and easily editable so they can be saved as transparent images for multiple uses quickly and easily.
(I apologize if I didn't get this across very clearly)

Hey guys. This'll be my first post on this forum. I've never been that into photography and image editing until I got my hands on PS and realized how amazing the process is and how many changes you can make. I actually spend quite a bit of time messing with pics in my spare time now. That said, I'm still a beginner when it comes to this program, so I need help on a couple things.

The current picture I need advice on deals with the old "sun in the background" problem. Its a picture of myself riding a horse, but a noob mistake made me forget that you need the sun facing you in order to not have your skin appear dark. I know to correct this in the future, but I'd like to know if there's a way that PS can make this look a bit better.

I'm not uploading the actual image, but a really good comparison looks like this:



How could I get the skin tone looking normal?

Hi.

This is my first post here, I'm French, so excuse any English mistake i may do.

I'm not an artist / designer / ..., still new about using image software editing like photoshop.

So i downloaded Photoshop CC to try it because i wanted to do something on my spare time.

I want to render digitaly a card collection based on a online Collectible Card Game (Duel of champions if you wanna know).

For this I downloaded their card art from their site.

Then i want to add several effect / filter to render them nicely.

So i read and watch many tutorial in this purpose.

I ended with a good result for 1 card.

Here is an example :


So what i did :
I get a source card art image, adding its red border, embossed it to get relief, adding a gloss effect in 3 different layers (the card art, the border and the gloss effect). Than i duplicate all this layers, swap them vertically and moved down to get a reflection.
I added a gradient to this new group of layers to have a nice fading effect to the reflection.

As I do not want to redo all the process again and again if I change main the source card Art, I want the reflexion to automatically update.

This was done using Smart object, both main source card Art and the (vertically swapped) reflexion card art using the same object storing my different main source card art.
So when i change in this object the main source card art used, it automatically change both the rendered card and its corresponding reflexion.

And then i Added a displacement filter to simulate a water reflection.

And the first problem (solved by now) occurred :

If i want to apply a filter to the group of layers corresponding to the rendered reflexion card, Photoshop have to convert and merged the whole group of layers into another new smart object and then apply a smart filter onto it. That worked but i lost the auto updating of the reflexion as the previous conversion have made Photoshop create in fact a whole new duplicated object storing a my different main source art.

So i partially resolved This by using Smart LINKED object instead of Smart object. I say partially because it is not really fully automated anymore.
Now if I change the main Source card Art to render a new one, I have to "manually" save file / update smart object to get the reflection updated.

I kinda accelerate this using a action performing a batch of saves to get a "save all" options (that clearly miss in photoshop). But for this i still have to open all my smarted linked object in order to apply the "Save All" batch.

But know I want to generalize the process to cards left, and render my whole card collection.

So i created a template based on what i've done so far using in this template Smart LINKED Object for the Main source card art and the reflected one. By the Way I exported the Reflection group in a PSD file, and refered to it as another Smart LINKED Object in my template. Doing so i'm sure Photoshop no more use a temporary PSB object correspond to the converted / merged reflexion Smart Object (remember : created in order to apply a smart Filter on it).

So what Happen now ?

I create a new testing psd file in witch i embed several new smart objects each one is an occurence to my template. Here i have to used smart Object and NOT smart LINKED Object because if so i'll always end up with the same rendered card several times. I have to get Phososhop create it own temporary duplicated object so a modification to one don't affect all the others after "Save All" batch on the corresponding working card.

So with what I have now, if I want to change 1 of the rendered card, i go its corresponding (duplicated) template object and from there i access again my LINKED object storing all my main source card Art.
I change to what source card art I want, and I have to open the reflection smart LINKED Object too in order to apply the "SAve All" batch.
Here is the "fun" (issue) thing : I have to apply the batch 3 time in a row to have the rendered card changed in my main testing psd file. I suppose saving 3 time time propagated the change along the Smart LINKED Object chain.
AND I have to make sure ONLY the corresponding smart (LINKED) Object file are opened before. If another file from a different rendered card is opened too the change will also be propagated to it and so having a duplicated rendered card. (I only want each card rendered once, but using the same template to avoid repetitive work).

So I explained in detail, but maybe not clearly, my situation and the step i went through.

TLDR
To summarize : I have a collections of Card art (jpeg).
I created a Template applying effect to render 1 card.
I created another template appliying same effect to render 1 REFLECTED card.
In both i use the same Smart LINKED Object that Store my collection on Card Art.
I make another Smart LINKED Object in the first template that reference the second one.
So with my first template I can update the rendered card and its rendered reflexion after changing the main source card art in the subsequent smart LINKED Object that store my whole cards art. I have to had all corresponding Smart LINKED Object file OPENED and save them all to have th updated result.

So not really automatic.

Then I want to render my whole card collection with effect and reflexion.
I create in my project a duplicate of my first template for each card to be rendered.
Then I have to open ONLY all subsequent corresponding Smart LINKED(or not) Object file of current working rendered card and change the main source card art, save all the file (several time to propagate change) to properlly update the current rendered card.
I have to do this for EACH of my duplicated template in order to render EACH of my cards.

Definitively not automatic process, and prone to errors.

Do you know a way to fully automatically render my card collection ? The only thing I want to do is chose one time the main source card art for each rendered card.


Finally another way to explain this issue and maybe get an answer is to instead explain simply what I want to do :

I have a collection of (jpeg) card art from an online card game.

I want to render them all with effect (gloss, emboss border, faded and water filtered reflection).
I want to do this automatically.
The only thing i manually want to do is chose the card art to be rendered for each of the card i want to render in my collection.

Here is an image of what i want based on what i've, not automatic, done so far :


Thanks for any help from photophop professional here.

After selecting an area to be cropped and I click on the "Enter" key, the whole pictures is wiped out. If I select the Rectangle tool and pick an area to be cropped and click Image>crop the cropped area is removed and the required picture remains.

Can anyone please tell me how to cure this problem so that the crop tool works properly?

RonB