Just done a substantial amount of work on a particular project which called for a PDF file.
No probs...File > Save As > Sweet as...
Back to original PSD file...
Edit...
Edit...
Save...
Edit...
Edit...
Save...Hang on!
Why is photoshop saving as PDF?
Save As...(PSD)
Bam!
All Layers gone.
One flattened PSD file.
Thanks Adobe....NOT!
I read the warning about saving as PDF too......it said it CAN change the Save As settings in the Save As dialog...
...Didn't say it bloody well would!
Why does it do that? Why change the settings? Just what is Adobe on? Can I have some? Please.
Lesson learnt on that one....but what a stoooooopid thing to do!
Regards.
MrAngry.
Hello All-
I don't understand how to go back & forth between ACR and PS with Raw (Nef) files. From ACR (after basic edits) I open to PS as "smart objects" having saved the last ACR settings before so, as a "snapshop" in ACR. This 1st snapshot is always available to the end. Once in PS I create a new Levels adjustment layer (for color correction) then return to ACR for further edits. After my final edits in ACR I take a snapshot. I now hit the OK button to return to PS for any final edits and "Save As" from there.
It doesn't matter if layers are merged or flattened before the save to Tif from PS, but when I go back into ACR I don't have a snapshot of the last edits I made within ACR, only the very first snapshot of the basics.
Why can't I save my last edits from ACR as snapshots within ACR before going to PS to save?
I would like to toggle between the two programs and save the edits in ACR snapshots within the original Raw file, yet be able to access the first snapshot that is the untouched raw file. I would like to do the edits, keep them, and retain an original raw file. I don't see how to do it going between ACR & PS.
This was a horribly confusing question to write, I did my best to explain it. Thanks for any suggestions at all....
**** iMac 27" - Mavericks 10.9.5; Photoshop CS5 Extended - ACR 6.7; FCPX 10.1.4;
Robes-
I have a PNG image that I have changed.
I'm wondering why it looks so different from the original.
I don't have the layered PS files so had to work off the PNG file...
The top one is the one I changed. The bottom one is the original.
Why is it that the original looks so clean and the revised one has little black lines underneath the icons etc?
Is there a different way to save that I should be using? I just chose save as: PNG
Any help would be appreciated.
Hi everyone, I introduced myself in a former thread. Name is Katie. I'm not new to Photoshop but am new to the more murky world of saving formats for various uses, printing, etc. I am in grad school, we're between semesters, and of all things they haven't really talked about saving! This week I was freelancing and saving to .JPG and .PNG, multiple images.
Problem:
I edited 150 images of product for a retail website on photoshopCS6. Company requires three sizes: two in .jpg, one in .png. Each image was in its own layer, in a group folder; a drop shadow effect was applied to the whole folder. For ea size requirement, I changed the canvas, resized all images at once to fit within it and ran the script.
I was able to run the Script on PS to batch save the .jpgs, and they RETAINED their canvas pixel dimensions in each image (700x525; 170x170). When I ran the same script to PNG-24, it worked but it DID NOT retain the canvas size and they were all wildly different.
I did some research, and found that people had to install script fixes to do this. I installed Dr. Russell's script for Image Processor Pro that should work in PS and Bridge. I tried it, still didn't work to retain size of PNGs. Am I simply using it wrong? Is that the only way to batch save certain file formats?
Because the images were due this morning, I individually saved every png ("save as" not "web/Devices") to ensure they were all 300x350.
I need to know there's a better way to do this for all other file formats, so I don't have to painstakingly save each image.
Hi Photoshop Gurus
I have been working on a billboard 414cm x 230cm and i have on 4000x6000pix image from a fullframe canon 5dmkii filling up the whole billboard.
What is the best way to save the image for billboard printing + preserve vector lines and text on top of the image?
(i have worked with the plugin perfect resize to scale up but don't like the results)
Now i make a psd. 1to10 (all smartobjects) and then save it as 3000dpi instead of 300dpi so the file is 10 times as big when printed and therefore full size. This way make the pdf's much smaller instead of making 1to1 resolution then i have to save as tiff since the file is over 2gb (can't save as pdf when to big) and the result is actually not as good as the pdf when i review the exports.. + 1to1 is very slow to work with since the files turn into 8gb psb and can be saving/loading for 30-60min sometimes.
<b>Would like to hear your opinion on this billboard printing? What is the best method to get your design from screen to 414cm x 230cm billboard without any bad surprises in the printing.
</b>
The printing company wants the file in TIFF, psd, pdf,ai. My impression if pdf work with everyone so prefer to go with that, of no benefit with other formats.
Hey Guys,
I am a freelance Photographer who primarily shoots night events (shows, clubs, etc.) and I am having some issues with my images coming out darker when I save them as JPEGS. I am shooting with a Canon 60D (Adobe RGB) and at the moment editing the photos in the Adobe RAW Editor (Adobe RGB). When I am editing the photos in the RAW Editor they appear to be in 24bit, but when I save them as JPEG (Adobe RGB) they appear to be more like 32bit (much much darker). Any ideas as to why this is happening? I would really just like the finished product to be what I'm seeing in my RAW Editor.
---> Side note, I just realized the images are only darker when viewing them through Windows Photo Viewer and Facebook (where the photos will primarily be housed). Does anyone know why the images are vastly darker when viewed through these applications? This is definitely a viewer problem. So how can I make my images look how they are supposed to while using things like Facebook?
Thanks in advance,
Matt
The first screenshot of the image in the RAW Editor, the second of the JPEG in Widows Photo Viewer.
***UPDATE***
None of my replies appear to be going through so I'll just post them here. Before posting this thread I attempted to save them as sRGB but it still had the same affect. I also just tried Steve's Save for Web method and have the same issue.
I believe I am saving them properly as JPGs (I will supply a screen shot in this post). MrTom, when I say 32bit what I meant was if you are editing an image in Photoshop and you change the color mode from 8bit to 32bit, it looks similar to the drastic darkness as seen with 32bit.
A mini solution I have discovered is to +70 the Black levels, this evens out the photos to roughly what I was going for once they save. I would greatly prefer an actual fix, but this will do if all else fails.
Thanks for all the feedback!
Hello,
I have a quite specific question about the use of Photoshop.
I wish to import a stack of images as layers in a Photoshop file. Then I wish to apply a certain rotation and translation on each of these layers (so no rescaling operation, only rotation and translations).
My question is the following. How can I somehow "save" the parameters of each translation and rotation for each layer so I can apply them on another stack of images later on? Basically, I wish to save the "Transformation matrix" for each layer and then be able to reapply it to another stack of images.
I thought of doing scripts and saving each operation, but I really need to be flexible and be able to go back to my primary stack of images and re-rotate or re-translate them later on if necessary, and resave the "transformation matrix".
Thank you in advance for your help and your time
Best,
Julia
Hello,
I am still in the learning mode with Photoshop. I've run across something I am clueless about. How to save a transparent png or gif. I saved it like I do in PSP but when I posted it on another forum, it has a black background. Can you explain to me how to save it transparent the right way?
Thanks-
pslane
Hi Everyone,
I want to save photoshop setting , pls help me out.
Thanks
Gurus: I have a big problem with a 12 image project. Example: All 12 original PSD images, 100- 300 megs each, were then flattened (all layers merged) to around half the file size of originals, then I converted to highest quality Jpeg's in the 10 - 30 meg range. I then placed the 12 Jpeg's in a InDesign template. The goal is the best quality product when I export the Indesign file to PDF. But my Mac says the entire Indesign file under "get info" says it is only 11 Megs!!?? Am I kidding myself? I thought I was getting good at this. Apparently, I have a lot to learn. Should I save the PSD's to Tiff's with LZW compression? Any other professional suggestions to make the project the best it can be when I export to PDF and not make a fool out of myself by publishing garbage. The publisher has a 400 meg PDF file size limit. I need your expertise, so set set me straight. I'm not going to compromise. So whatever it takes, I'll get it done. Thx, TimothyKim
Hi.
This is my first post here, I'm French, so excuse any English mistake i may do.
I'm not an artist / designer / ..., still new about using image software editing like photoshop.
So i downloaded Photoshop CC to try it because i wanted to do something on my spare time.
I want to render digitaly a card collection based on a online Collectible Card Game (Duel of champions if you wanna know).
For this I downloaded their card art from their site.
Then i want to add several effect / filter to render them nicely.
So i read and watch many tutorial in this purpose.
I ended with a good result for 1 card.
Here is an example :
So what i did :
I get a source card art image, adding its red border, embossed it to get relief, adding a gloss effect in 3 different layers (the card art, the border and the gloss effect). Than i duplicate all this layers, swap them vertically and moved down to get a reflection.
I added a gradient to this new group of layers to have a nice fading effect to the reflection.
As I do not want to redo all the process again and again if I change main the source card Art, I want the reflexion to automatically update.
This was done using Smart object, both main source card Art and the (vertically swapped) reflexion card art using the same object storing my different main source card art.
So when i change in this object the main source card art used, it automatically change both the rendered card and its corresponding reflexion.
And then i Added a displacement filter to simulate a water reflection.
And the first problem (solved by now) occurred :
If i want to apply a filter to the group of layers corresponding to the rendered reflexion card, Photoshop have to convert and merged the whole group of layers into another new smart object and then apply a smart filter onto it. That worked but i lost the auto updating of the reflexion as the previous conversion have made Photoshop create in fact a whole new duplicated object storing a my different main source art.
So i partially resolved This by using Smart LINKED object instead of Smart object. I say partially because it is not really fully automated anymore.
Now if I change the main Source card Art to render a new one, I have to "manually" save file / update smart object to get the reflection updated.
I kinda accelerate this using a action performing a batch of saves to get a "save all" options (that clearly miss in photoshop). But for this i still have to open all my smarted linked object in order to apply the "Save All" batch.
But know I want to generalize the process to cards left, and render my whole card collection.
So i created a template based on what i've done so far using in this template Smart LINKED Object for the Main source card art and the reflected one. By the Way I exported the Reflection group in a PSD file, and refered to it as another Smart LINKED Object in my template. Doing so i'm sure Photoshop no more use a temporary PSB object correspond to the converted / merged reflexion Smart Object (remember : created in order to apply a smart Filter on it).
So what Happen now ?
I create a new testing psd file in witch i embed several new smart objects each one is an occurence to my template. Here i have to used smart Object and NOT smart LINKED Object because if so i'll always end up with the same rendered card several times. I have to get Phososhop create it own temporary duplicated object so a modification to one don't affect all the others after "Save All" batch on the corresponding working card.
So with what I have now, if I want to change 1 of the rendered card, i go its corresponding (duplicated) template object and from there i access again my LINKED object storing all my main source card Art.
I change to what source card art I want, and I have to open the reflection smart LINKED Object too in order to apply the "SAve All" batch.
Here is the "fun" (issue) thing : I have to apply the batch 3 time in a row to have the rendered card changed in my main testing psd file. I suppose saving 3 time time propagated the change along the Smart LINKED Object chain.
AND I have to make sure ONLY the corresponding smart (LINKED) Object file are opened before. If another file from a different rendered card is opened too the change will also be propagated to it and so having a duplicated rendered card. (I only want each card rendered once, but using the same template to avoid repetitive work).
So I explained in detail, but maybe not clearly, my situation and the step i went through.
TLDR
To summarize : I have a collections of Card art (jpeg).
I created a Template applying effect to render 1 card.
I created another template appliying same effect to render 1 REFLECTED card.
In both i use the same Smart LINKED Object that Store my collection on Card Art.
I make another Smart LINKED Object in the first template that reference the second one.
So with my first template I can update the rendered card and its rendered reflexion after changing the main source card art in the subsequent smart LINKED Object that store my whole cards art. I have to had all corresponding Smart LINKED Object file OPENED and save them all to have th updated result.
So not really automatic.
Then I want to render my whole card collection with effect and reflexion.
I create in my project a duplicate of my first template for each card to be rendered.
Then I have to open ONLY all subsequent corresponding Smart LINKED(or not) Object file of current working rendered card and change the main source card art, save all the file (several time to propagate change) to properlly update the current rendered card.
I have to do this for EACH of my duplicated template in order to render EACH of my cards.
Definitively not automatic process, and prone to errors.
Do you know a way to fully automatically render my card collection ? The only thing I want to do is chose one time the main source card art for each rendered card.
Finally another way to explain this issue and maybe get an answer is to instead explain simply what I want to do :
I have a collection of (jpeg) card art from an online card game.
I want to render them all with effect (gloss, emboss border, faded and water filtered reflection).
I want to do this automatically.
The only thing i manually want to do is chose the card art to be rendered for each of the card i want to render in my collection.
Here is an image of what i want based on what i've, not automatic, done so far :
Thanks for any help from photophop professional here.