How To Use Opacity Settings To Create A Composite Imgage?

I have seen this image before and we may have used it a while back. With a whole new set of players, I feel it's safe to bring it back in a new challenge.

No comments from the cheap seats on the condition of her skin. This is a lovely young woman and I would hope that we can all treat her image with respect.

I encourage everyone to give it a try even if your new to Photoshop. All participants should be prepared to explain the techniques they have been using, as we can't learn or help without some idea as to how it was accomplished.

Good luck!



Here is my 1st attempt.

edit: I start by opening the original and duplicating it and then turning off the original layer.
I create a new layer. This is the layer that I will do all of the following adjustments on.

I started by using the following tools and settings.
Healing Brush Tool - Mode= normal - Source= Sampled - Clone sample mode= Current level and below.
Spot Healing Brush Tool - Mode= Normal - Type= Content aware - Sample cloned data from composited data= Sample all layers.
Brush Tool - Mode= Normal - Opacity= 100% - Flow= 1%

This is the image (Layer A) after only using the tools above and one added Levels Adjustment Layer.



edit: I then select the uppermost layer (Levels Adjustment layer) and hit Shift>Option>Command + E to stamp all visible layers. I then name this layer A.
I highlight all other layers except layer A and the original background layer and group them. I then turn off the group.

I then start where the tutorial starts with only the layer A turned on.

Here is the image after using a skin softening technique described in this video:

I am building a composite image, create a new image clean white background and drag from bridge the images I want to use in the composite. Here's my issue...the images I have brought in are automatically turned into smart objects..( love those) so I open one of those placed S/O images and edit/adjust it then save and close...like it should the composite reflects the change. I can open and close that s/o as many times and make tons of changes...again awesome....but I may want to use that same image by itself and want to retain those changes....but when I go to the folder that I took the image from, the original image does not reflect any of those changes.

So my question is, where on my computer does the edited version of the placed image get stored...I'm guessing a temp folder somewhere, but can't find it!! Any body know?

Thanks
Brendan

Hallo everybody,
following a tut about Photoshop compositing, I have to create a fake shadow on the ground. I make it pretty good (see image 1) using tre different layer copy with different blendings mode and Opacity.




But when i Merge three layer i loose my semitransparent shadow...it becomes completely black, at the starting point...
(see image 2)



What it wrong?

And than, if I want to blur the (unique) faked shadow layer, how can i male it without blurring all layers of the document? I try to use an empty layer as a Clipping mask, and I applied blur to it, without results...
please help!

Thx!

I've noticed that I get a good flow painting over a textured canvas (blank canvases are not for me) when doing so I work with a brush with the opacity set to about 45 and two layers, the bg textures and the actual image.
When I feel I'm done with my sketch I want to exclude the bg layer but still use the texture seen through the actual image i.e. I want to select all pixels in the top layer, merge this with the bg texture and then cut it out.

I've tried a couple of techniques (incl. ctrl + click on the layer icon) but not found any technique that selects _all pixels_ in a layer without me having to manually add some here and there.
Anyone have a clue how to?

Example:


Many thanks in advance.
/Mansson

Hi All

I am reasonably new to photoshop but am wanting to get a lot better! I am quite interested in being able to change the colours/livery of objects in photos most notably trains due to this being one of my main interests.

I have an image of a train and I want to edit the livery but keep an element of realism.so It doesn't just look drawn like a cartoon. I have made an attempt at this but I am not massively happy with the results. I have uploaded both a copy of the original image and a copy of my amended image. My main problem is the lack of realism, because I am trying to go from a very light colour to quite a dark blue I seem to lose a lot of the detail from the original image.

I have also uploaded an image of the sort of thing I would like to achieve. The person who has done this makes a really good job of them and I would love to be able to achieve similar results.

The way I have created my image is simply but creating adjustment layers for hue and saturation and levels and played with the settings until I get something like.

Does anyone have any tips on how I can make a better attempt at changing to colour so it retains an element of realism?

Original Image
My attempt
Quality I would like to achieve


Thanks In advance.

Chris.

Hi folks, newbie to the board. I'm using Photoshop CS6 and have hit an issue that I can't get to the bottom of and was hoping someone could help.

I've completed an image for a client. The original involves many layers, and I have got to the point when I want to merge everything down into a PDF for them to send to their printers.

Problem I am having is that when I try to directly save as a PDF or merge down the layers in a copy of my main PSD file, I am losing certain layer styles.

I have tried creating a blank layer below an offending layer and hitting CTRL + E, I have tried creating a blank layer, hiding all but the offending layer and blank layer and merging visible, I have tried Layer - Rasterize Layer Style, I have tried turning the layer into a smart object and then rasterizing (I lost the layer style as soon as I turned it into a smart object, even though it is still present in the smart object itself), and I have tried turning the layer into a group and merging the group. I have also tried saving the file in a number of different formats to no avail. I don't know what else I can try and why none of this has worked! I've also tried right clicking on the FX in the layer palette and chosen "Create Layers" at which point I get a dialog: "Some aspects of the effects cannot be reproduced with layers", and I get the same result. Most noticeable style that disappears is the drop shadow.

Weird thing is this isn't the case for every layer. I've particularly noticed it happens on text layers that have been text warped. However I've tried rasterizing them before trying to merge and that hasn't helped so I can't see how that is the problem.

I hope someone can help, I am totally stumped. If it makes a difference the mode is CMYK Color, 8 bit.

James

I've just discovered the existence of the Knockout feature in the Layer Blending Options. If you select Deep Knockout it allows your current layer to bypass all intermediate layers below it and instead blend only with the original, bottom Background layer.

I tried a few experiments and got Deep Knockout to work, but it only seems to work if the original background layer is present and intact. If I delete or rename the background layer, or substitute something else as my bottom layer, the Deep Knockout doesn't recognize this new bottom layer as the "Background" and drills right past it down to emptiness---an entire screen of blank pixels.

How do I take the bottom-most layer of my stack and redefine it as a Background, so that Deep Knockout will recognize it? (Also, I've never understood why Photoshop even bothers with the background layer, what special properties it has, and what advantage it provides vesus any other "normal" layer that sits at the bottom of the stack.)

Thanks

I have Photoshop CC and I loaded a PSD file into it with many layers.

Somebody created the PSD design for me.

I am trying to export all layers separately but when I go to Scripts >> Export Layers to Files, it kinda mixes a particular layer with all other layers.

So I can never get a layer on its own.

Have a look at one of these export below. The top shade should be on its own, but its accompanied by the bottom layer also. Every other file is also accompanied by the bottom layer. Any idea how I can just export all layers on their own?



Any suggestions?

JH

Hi

I have a file with 760 layers plus a background that is a photo. The layers are rasterised smart layers from Illustrator

I have a task by which I have to have the background always visible. I then make the first layer visible as well as the background and then save for web and devices. Once one I turn that layer off and then turn the next layer on and then save for web and devices. 760 times Oh God!!!!

I know I can create an action and even a droplet from the action the issues I have is how do I tell the action to turn the first layer on and then optimize the resultant image and then turn that layer off and then move to the nest layer and so on through the 760 layers

Any ideas would be great

Thanks

Hi I'm quite a noob.
I would like to get some help creating this effect in photoshop.
1. The effect of having a gradient-like effect of the background. Is it made by creating a solid color and then using a large pixel soft brush to create the light effect?
2. The torchlight like effect of the images of the girl and the hands.
Thanks.