Revealing Part Of An Underneath Layer

Hello again,

I'm editing an image and I've spent lots of time refining the details. I had to grab the image from a background and it did not leave so easily, at least for me, but I've gotten passed that. I'm now doing some finishing touches. There's some small parts of the image that lost detail in the transfer from backgrounds and some of it got muddy in areas as well. I am wondering what the best way to take individual parts of the image and put them in place underneath the edited image so that when I erase everything the quality piece of the image is revealed.

Thanks,

J


Similar Content



Maximize Quality/minimize Size

Hello,

I am completely new to this forum so I apologize if this is posted in the wrong place. I am using Adobe Photoshop Elements 9 and have a question regarding file size/quality. So, here it goes.

I am currently working on publication that requires all downloaded photos to be uploaded to a website that has a max file size of 20 mb. When I download an image to use for a background (some sort of a pattern that is normally somewhere around 800 x 800 size) the image is about 180 kb which is perfect. Unfortunately, the image has a poor ppi resolution and prints extremely blurry so in photoshop under image size, I increase the resolution so that the file size & resolution is bigger. This takes a lot of guessing on my part.

For example, if I increased the image resolution to 100000000 ppi, the file size would end up way over 20 mb which does me no good. So what I am wondering is, is if there is a way to optimize the the resolution of the image, given the file size limitations, without all of the guess and check?

If this looks confusing, I apologize and will gladly explain more. Any help would be greatly appreciated.

Downsize Image . Resize Collage . Keep Quality .

Hello! Very much so a noob question . ive done my research and im just here for a very definite tutorial . im learning how to resize images from Big to small. Only problem is i cant seem to keep the high quality resolution . Ive included both images .. the "moonshine" collage is what id like to minimize. The "Whiskey" image is able to be downsized with no resolution loss when i downsize why? ID also like to keep them PNG or transparent in the background .

the moonshine collage image is one i made in photoshop cs6.

id like to make them W:280 pixels H:110 pixels/100 pixels



Theres a screen shot of the photo in place . The GREEN image is the image in low resolution , which i cannot figure why . the other RED image is how id like all my images to appear . There both pretty big original images as well ..

Cutting Out Clipping Mask Images

Hi all,

I have a problem with an image that I would appreciate your help with.

As you can see below, the image is a t-shirt shape made up of several images like a collage/mosaic (ignore the fact that the same image is repeated, they will eventually be different images).

I have achieved this by applying clipping masks to the different image layers over the top of the t-shirt image. What I now want to do is individually save all of these images so that they can be used as buttons in Adobe Flash. This is the part I am having trouble with.

I have tried using the slice tool which does work however the saved slices are all square shaped when obviously each individual image is not always a square/rectangle. Even saving them as a .png with a transparent background, I still can't use them as when they are brought into Flash, the whole square area becomes clickable as a button which I don't always want.

Hope I've made sense there!

Thank you.

Image Smoothing

Hey Guy ! wass up

well actually i was editing an image and had a small difficulty .

below is the image i am tryng to edit :




i used the content-aware move tool to take off the happy diwali at the top :

now this is how it look , see how rigid it looks on top :P , (look below)



how do i make that thing on top look smoother :P


Thank you .

If Allowed.. Help Needed

Sorry admins if this isnt allowed but ive been struggling on this for a while.
Im need help turning this (image in post below) image into a stencil type form.
Ive tried lots of different guides but i cant get the image to look "realistic".

If anyone could help it would be appreciated, im looking for the image backround to be white and the stencil part green.
thanks.

Removal Of Background In An Image

Hey all,

I'm new and thought I would join when I realised I'm not as good at Photoshop than I thought!

I have an image and I'd like to remove the background. I've tried using the selection tools and rubbers but when I'm done it looks like someone a 5 year old has done it. In fact they would do a better job!

I've attached the image

Just wondering if there is anyone out there that could help.

Thank you!
Ben

Where Oh Where Do My Placed Images Go?

I am building a composite image, create a new image clean white background and drag from bridge the images I want to use in the composite. Here's my issue...the images I have brought in are automatically turned into smart objects..( love those) so I open one of those placed S/O images and edit/adjust it then save and close...like it should the composite reflects the change. I can open and close that s/o as many times and make tons of changes...again awesome....but I may want to use that same image by itself and want to retain those changes....but when I go to the folder that I took the image from, the original image does not reflect any of those changes.

So my question is, where on my computer does the edited version of the placed image get stored...I'm guessing a temp folder somewhere, but can't find it!! Any body know?

Thanks
Brendan

Generate Image Asset: Is It Possible To Generate Layer Groups As Sub Folders?

I was wondering if its possible to use Generate > Image Asset to create folders out of Layer Groups and each layer inside to be a file in that folder? So far I have only been able to generate the layer group as a single image rather than a folder.


If this is not possible and I must add a prefix of (Folder name)/imagename.jpeg ; then is there a way to still add a dimension prefix to a layer in addition to a subfolder prefix? Example: Folder1/ 100 x 100 Image1.png currently, if i do this, it will generate an image with the 100 x 100 as part of the name rather than recognizing it as a dimension.


Thanks!

Action Terminology -- I Need Help.

I saw this photoshop action the other day I was impressed with. I'm on the hunt for a similar Action but I'm completely lost on what search terms to use in my hunt.

I have 4 images that give you an idea what the action does. I will also use the images to help explain my confusion.

IMAGE 1 -- nothing special here -- just showing you the image loaded into PS.



IMAGE 2 -- Image 2 shows you the first step of the action. It basically gives you an outline of the image and changes the background. I would love to have the background color to be all white but all in all this is ok.



IMAGE 3 - In this image I'm showing that you can use any brush to paint in what you want to show on the image. This is where I get lost in my search. I have been looking for an action that can convert the background like you see in image 2 above and than give you the ability to paint what you want to show in the image. I have used terms like "sketch painting" "pencil painting" "painting image" "brush painting" "mask painting" but I can not find any actions that does what you see in these images.



IMAGE 4 - When you are done brushing , you can continue the action and it will change what you brushed in to look like a painting.



Ok..............I'm looking for actions that basically does the above. The two key elements of the action is how it handles the background and also gives me the ability to use a brush tool to paint what I want seen in the final results. Most actions I seen will just convert the whole image to look like a painting.........I want more control of what is seen in the final results by using a brush to paint what I want seen in the final results. What it converts to in the end isn't important but I would love to find something where I could convert the image so it looks like a painting, a pencil sketch, comic sketch, etc.

You can help me with what to search for or even better yet, if you know where I can find such actions, please point the way.

I spent 2 days on GraphicRiveer with very little luck or what I find did not provide me enough info for me to be certain I was getting what I wanted. Other than GraphicRiver, I have been googling but no luck.

Thanks

Looking For Help With An Avatar Image.

Hey there!

I've used a certain image as my avatar on various websites and I'd really like it redone by some awesome artist. Basicly just a remake/updated version of the image below.

So what I'm looking for in the image is a red devil that has a beer belly and white boxers with red hearts on them and who is wielding(?) a trident. Weird request I believe, I don't know if theres people doing this kind of stuff, but I decided to ask anyway.

The old image I have is quite a poor one, very small resolution also, but I hope you'd get the idea from the image:


(Also the beard and eyebrows of this one are awesome )
As of the new images resolution, I dont think it matters as much, I can downscale it myself I believe, but it will be used as an avatar on forums and steam etc.

Thanks in advance if someone's willing to do this for me.