Help Resizeing A Shape

Hi!
I have a dilemma with a high resolution picture that I want to use on a large screen. The problem is the screen has a low resolution which seem to distort the picture sometimes. Also I would like to zoom in the picture.

The monitor is a 47 inch HP LD4720tm sporting a 1,920 by 1,080 resolution. So the resoultion is like an ordinary desktop monitor but the size is more than double that. In other words, the pixel density (ppi) is much smaller.

The picture is of a clock. Size is about 670X670 pixels. I cropped out this clock from a larger 12MP Raw format Nikon picture. The cropped out clock looks something like this (my real image is copyright protected but this is very similar with 700x644px):


(http://www.stanleylondon.com/ClockShipsBellSml1.jpg )

On the screen this picture should take up a fixed size of 170X170 pixels (ie about 10% of the monitor).

The first way I did this was to simply in Photoshop Elements save the 670X670 picture as a png and with dimensions 170X170 pixels. ("Save for web" to get it as small in size as possible and chose png and 170X170). Then I put the 170X170 pic on the background canvas. It looks very nice. However, when I zoomed in the numbers and other details look very jagged or blurry.

So now I tried with the larger resolution 670X670px. I put this on the background too, and as it should only take up 170X170px, I clicked it and dragged to resize it. But this picture looks much worse than the 170X170 pic. I suppose the 170X170 pic perfectly fits the 170X170 space while the 670X670px is distorted. I mean, for the 170X170 pic there will be one pixel for each monitor point. When I do the exact same comparison on a 21 inch 1920X1080 monitor they look equally good, so it must be due to the low pixel density of the 48 inch monitor where the human eye can see each pixel.

However, now when I zoom in the details for the 670X670px were clearly visible.

I tried a few other resoultions like 360X360 and 270X270 (I resized the 670X670 pic to these sizes) and both png and jpeg. They also looked worse in normal view but of course in zoomed view they displayed more details than the 170X170 pic.

My dilemma now is how to get an image that will look good both when zoomed in and when in 100% zoom (normal view) on this large screen. Is there a way to do this. Eg like resizing to a resolution larger than 170X170 that will also look good in normal view.

Thanks.

Hello! Very much so a noob question . ive done my research and im just here for a very definite tutorial . im learning how to resize images from Big to small. Only problem is i cant seem to keep the high quality resolution . Ive included both images .. the "moonshine" collage is what id like to minimize. The "Whiskey" image is able to be downsized with no resolution loss when i downsize why? ID also like to keep them PNG or transparent in the background .

the moonshine collage image is one i made in photoshop cs6.

id like to make them W:280 pixels H:110 pixels/100 pixels



Theres a screen shot of the photo in place . The GREEN image is the image in low resolution , which i cannot figure why . the other RED image is how id like all my images to appear . There both pretty big original images as well ..

Hello,

I am completely new to this forum so I apologize if this is posted in the wrong place. I am using Adobe Photoshop Elements 9 and have a question regarding file size/quality. So, here it goes.

I am currently working on publication that requires all downloaded photos to be uploaded to a website that has a max file size of 20 mb. When I download an image to use for a background (some sort of a pattern that is normally somewhere around 800 x 800 size) the image is about 180 kb which is perfect. Unfortunately, the image has a poor ppi resolution and prints extremely blurry so in photoshop under image size, I increase the resolution so that the file size & resolution is bigger. This takes a lot of guessing on my part.

For example, if I increased the image resolution to 100000000 ppi, the file size would end up way over 20 mb which does me no good. So what I am wondering is, is if there is a way to optimize the the resolution of the image, given the file size limitations, without all of the guess and check?

If this looks confusing, I apologize and will gladly explain more. Any help would be greatly appreciated.

Hello,
l would really appreciate some help since I am coming to a deadline for printing some material. My problem seems to me like it should be quite eas, I have come close to a sufficient solution on my own but still not quite good enough resolution to print 24"x18" signs. In any case my issue is that I have an old design file of mine for a 5"x3" sticker with a logo on it as seen. When I try to enlarge it to the 24"x18" size the edges are way too pixelated. I have tried different selection techniques as well as refining the edges but no luck to make a high res version as yet. It's a rather simple shape and frankly I don't even care if it is redrawn to match at high res. In any case here is a copy of the logo in its native size on a 24x18 photoshop canvas. There is an image and an attachment Photoshop file, I would greatly appreciate it if someone can download the photoshop file and repost it with their efforts.
Thanks,
Dino
24x18 canvas with low res hook.psd

Plan on printing some large format Chromaluxe white gloss aluminum prints

Using a vendor/trade printer I work with just outputs what I upload

My issue is I am using images from 20 mp camera, believe files are about 5500 pixels wide so decent resolution but vendor wants 300 dpi at actual size which would equate to only about half the size I wanted to print
Looking to print as large as 36" x 24" but at 300 dpi my source file is about 18" wide
Started as RAW files

Since most cameras I think produce images in this range, I imagine this is a common issue. What would you do

Not place this order
(This vendor only has large sizes for the 3:2 ratio I desire)

Have photoshop up sample to 300 dpi or 240 at least using their tools?
If so which one of the options in photoshop do you use?

Submit my lower resolution files as is and hope for a good result

Thanks

Hi everyone,

I would like to ask what is the Resolution for a Standard ID size for a company. I am using the size 2.103" x 3.38" and 72 resolution pixels/inches, I don't know if this is correct cause it seems very small.

Please give some advice.


Thank you,
efasde

Hi,

I am learning Photoshop in the hope of printing posters. I have questions regarding printing. Originally, when you create an image the resolution is set to 72 pixels/inch. I have learned I need to switch that to 300 pixel/inch.

1)Will I have to recreate all my images from scratch in 300 resolution?

2)Do I lose a lot of quality on the final product if i convert 72 -> 300.

3)My images are 11x17, when i hit 100% and view rulers, it shows my image at roughly a 3:1 ratio, why does it do this?

4)Can I view what a final printed image will look like with in Photoshop?

5)How do I preserve quality when switching to 300 resolution?

6)Say I use an image that is originally 600x600, will switching to 300 resolution make the new image horrible?

I may have more questions with as these get answered,
Thank you,
Geokatz

Hi guys,

I really love the sharpness/high quality of images and now I got a MacBook Retina I can see the details even more. I was wondering when starting a "New file", if the values of "Resolution" has an impact on the eventual quality of the image? If so, what are the best values to put here?

Looking forward to your replies, please help me get a better understanding of this.

Ok so as the title says i need a logo for my CSGO (Counter Strike Global Offense) Team. I already have a picture drawn out, but i need the skills of a Photoshop master to make it come to the computer screen. if you can, make at least 3 different styles of the logo. if you cant do 3 different styles that's perfectly fine, i just really need help making this on the computer. Here is the Logo that i have drawn and would like to be made.



As an extra note. if at all possible i would like for the hawk to be colored with blue and white and the eye be black. But as i said above if you can do 3 different styles of the hawk with the words " Team Pantheon" added to it, that would be great and i would be greatly appreciative of it. Now for the background, i really don't care if its just the hawk itself, but if you think it would look better with a shield or a hexagon or a circle in the back then go ahead. I only provided the drawing (i would really like to see your guys' creativity as well since i have non when it comes to Photoshop).

I would like to see what you can do with it. i would like the words "Team Pantheon" to be put into the logo somehow but don't make it too big. here are some examples to reference to if you need to



If you do decide to help me out, just post a response either saying you will do it and we can exchange contact. or just re post the finished product here.

Can any1 help me recreate this picture or just help me finr bigger resolution?

Thx