Refine Edge Problem

Using CC2014, when I use the Quick Selection tool, and then
try to us Refine Edge and the Refine Radius brush, the brush
will not open. Instead, I get that circle with a slash where the
brush should be.

In the tutorials, the brush works. Not for me.

Simple setting error?


Similar Content



No Pixels More Than 50%

Hey All,

First time post he

I'm using Photoshop CS6, trying to make a selection using a quick mask and a brush. Normally I would put the quick mask on, paint in my selection using a brush preset and then turn off the mask, invert the selection, and use refine selection to make it a new layer.

Now when I turn off the mask, I get the error "no pixels are more than 50% selected". I've seen on other forums that feathering can be a problem, but as far as I know the brush preset I'm using has no feathering. In fact, I just reset the tools and tried again and it still gives me that error. I've definitely selected the correct layer because there's only one to select.

Any advice?

Thanks! M

Brush Not Behaving As It Should

Hello Everyone!

I am facing a problem with a brush in Photoshop CS6 Portable. I'm using a Wacom Intuos Pro and yesterday I drew a picture. Today I come back to that same picture and when I select it so I can work on it with the same brush, the nuances are gone. Meaning when I give a lighter stroke there isn't an increase in opacity, like a real brush effect. The stroke is just fully there or it isn't. I'm baffled to what might be the cause of this and feel like I've tried everything so if anyone can offer any help on this issue I would be forever grateful!

Edit: I think I solved it, I turned on always pressure for size and adjusted the brush size and it seems to give me the same brush I was using (yes I'm kind of a noob, especially with tablets), somehow it got turned off I guess? I was wondering though, is it possible to extract the exact brush info & brush parameters from a drawing, by for instance clicking on it?

Photoshop Signature Brush

i have a signature watermark i put on my favorite images currently i have it is saved as a psd so i open it then move it onto the image, i was trying too create a brush that done this but the writing is white so becomes transparent when i make a new brush and only the camera icon is visible, i also tried to create an action where i recorded opening the psd , moving it onto an image, i was hoping this would work but didnt , something about move brush not defined if i remember, also the brush i created turns out sort of a green color see bottom image i know there probably a simple way around it and would appreciate any help , ive attatched an image of the signature so you know where im at , its transparent i just put a grey layer behind so you can see,

Complex Selections (not Hair)

I have hundreds of dancer photos I need to change backdrops on. I don't have an issue with hair but many of the pictures the dancers are wearing crowns which is so time consuming I may never finish the photos. Can someone please give me a suggestion on how to handle the crowns? Here is an example of one I've completed but not completely happy with:



I have searched everywhere but only find tutorials on hair.

I am using CS6 and using the quick selection tool and refine edge.

Thanks in advance,

Bill

I Need Help Trying To Do This Type Of Brush Effect ?

I need help trying to do this type of Brush effect ?
the red and white brushes strokes going down I like to know what type of brush does this type of effect or what was used to do it ?
cause I tried all the brushes the comes with photoshop and I still couldnt come close to making the same brush stroke effect at all.
does any one know how to do this type of brush stroke effect ? any advice would help ..


How To Make Paint Brush Automatically Paints Colour On Black And White Layer

This is probably an easily solved question as it was something I used to have set before I format my laptop and lost my preferences but here it is..

Before format, when I would apply the Black and White adjustment, my paint brush or pencil tool would automatically pencil/brush colour into the photo, now it doesn't and I can't seem to figure out how to revert it back to how it was. I've Googled it and can't seem to find what I'm looking for, although I think I may be just wording it wrong.

So, as below..



On these pictures I just applied black and white adjustment, hit paint brush or pencil tool and it'd inject colour in to the image, I can't seem to get that to happen anymore.

As I mentioned, someone will probably solve this really quickly.

Appreciate any help you can give.

Help Probably Simple

I'm a newbie i dont know these common problems im 2 mins in on this video



and when he selects the layer mask and paints black to turn the image to normal color. my brush does nothing, nothing happens when i use a brush. here my screen idk if i have something turned off/on that shouldnt be.

Need Pattern Stamp Tool Without Pixel-wide White Boundary

Unfortunately the pattern stamp tool insists on having one or two pixel-wide white edge on my touch ups. No brush type or amount of hardness I choose from the tool options bar gets rid of this. Any idea how I can set the pattern stamp tool to have a hard edge, so hard there's absolutely no fade to white at all on the edges.

Graphic For Printing On The Back Of A T-shirt

Hello,
I am not sure if this is even a necessary worry of mine nut I will pitch it out anyway. I will be printing the attached file on the back of a white t-shirt and I wondered if there was any technique that could be used to reduce the harshness or abruptness of the image that may be seen when the image is printed onto the white shirt. The color at the edges of the image is very light / almost white so fortunetly in most areas of the print you may not be able to clearly see the edge. if I am not making any sense I guess what I am trying to say is I would like for it to seem like the image fades away at the edges slighhtly rather than seeing a clear edge of the picture. I could imagine using some kind of edge eraser tool with a spotty brush or partial opacity but not really sure the best way to try and achieve it. The picture unfortunetly has texy of my url running very close to the edges so I would like to be careful that we don't fade any text away. Just wondered I would see if there was a quick and easy way to do it. Ideas are welcome. If you do any work please post back your .psd file and a brief description (if it's not too complex) of how you did what you did.
Thanks,
Joe

Creating Car Light Trails Using "stroke Path With Brush"

Hi! I want to create some car light trails for a matte painting scene.

I'm using a "Stroke path with brush", applying Shape Dynamics so the brush size is reduced as it approaches the vanishing point of the scene (1st image).

However, when I use a Round Blunt tip (to produce a more realistic effect simulating the light trails of several cars, 2nd image), I'm not able to apply Shape Dynamics for the brush size (3rd image).

Do you know any other brush tip that could produce a realistic effect (such as in the 4th image), while also being able to reduce its size via Shape Dynamics?

Or what any other way could I achieve a similar result?

Thank you!