Generate Image Asset: Is It Possible To Generate Layer Groups As Sub Folders?

Hi all!
We're using photoshop to prepare assets for a game engine, and i'm trying to find a good workflow, which i can then teach to my artist.
At this point, i have an image with five layers. 12345

Layers 2-5 each have a layer mask on them.

Now what i want to do is, copy the layer mask of layer 2, and paste it into the Red colour channel of layer 1
then mask of layer 3 into the green channel of layer 1
layer 4 into the blue channel
and layer 5 into the alpha channel

So the result is that the channels of that layer will each look identical to the layer masks, and thus layer 1 will look like a wierd (but programatically meaningful) mishmash of colours.

I'm having some problems though.




Apologies for the massive image.
This is the green channel that i've gained from the above procedure. The big gradiented circle in the middle is what i made, but for some reason i have this white stripe down the left side too. I have no idea what that is or why it's there. It appears on both he green and blue channels when i paste in a mask. But if you look at the channel image in the right hand panel, it doesn't seem to have a stripe down it.

the stripe is definitely there, it's affecting the main image, and its annoying me.

any thoughts what might be causing that?

I've noticed that I get a good flow painting over a textured canvas (blank canvases are not for me) when doing so I work with a brush with the opacity set to about 45 and two layers, the bg textures and the actual image.
When I feel I'm done with my sketch I want to exclude the bg layer but still use the texture seen through the actual image i.e. I want to select all pixels in the top layer, merge this with the bg texture and then cut it out.

I've tried a couple of techniques (incl. ctrl + click on the layer icon) but not found any technique that selects _all pixels_ in a layer without me having to manually add some here and there.
Anyone have a clue how to?

Example:


Many thanks in advance.
/Mansson

Hallo everybody,
following a tut about Photoshop compositing, I have to create a fake shadow on the ground. I make it pretty good (see image 1) using tre different layer copy with different blendings mode and Opacity.




But when i Merge three layer i loose my semitransparent shadow...it becomes completely black, at the starting point...
(see image 2)



What it wrong?

And than, if I want to blur the (unique) faked shadow layer, how can i male it without blurring all layers of the document? I try to use an empty layer as a Clipping mask, and I applied blur to it, without results...
please help!

Thx!

I have seen this image before and we may have used it a while back. With a whole new set of players, I feel it's safe to bring it back in a new challenge.

No comments from the cheap seats on the condition of her skin. This is a lovely young woman and I would hope that we can all treat her image with respect.

I encourage everyone to give it a try even if your new to Photoshop. All participants should be prepared to explain the techniques they have been using, as we can't learn or help without some idea as to how it was accomplished.

Good luck!



Here is my 1st attempt.

edit: I start by opening the original and duplicating it and then turning off the original layer.
I create a new layer. This is the layer that I will do all of the following adjustments on.

I started by using the following tools and settings.
Healing Brush Tool - Mode= normal - Source= Sampled - Clone sample mode= Current level and below.
Spot Healing Brush Tool - Mode= Normal - Type= Content aware - Sample cloned data from composited data= Sample all layers.
Brush Tool - Mode= Normal - Opacity= 100% - Flow= 1%

This is the image (Layer A) after only using the tools above and one added Levels Adjustment Layer.



edit: I then select the uppermost layer (Levels Adjustment layer) and hit Shift>Option>Command + E to stamp all visible layers. I then name this layer A.
I highlight all other layers except layer A and the original background layer and group them. I then turn off the group.

I then start where the tutorial starts with only the layer A turned on.

Here is the image after using a skin softening technique described in this video:

Hi

I have a file with 760 layers plus a background that is a photo. The layers are rasterised smart layers from Illustrator

I have a task by which I have to have the background always visible. I then make the first layer visible as well as the background and then save for web and devices. Once one I turn that layer off and then turn the next layer on and then save for web and devices. 760 times Oh God!!!!

I know I can create an action and even a droplet from the action the issues I have is how do I tell the action to turn the first layer on and then optimize the resultant image and then turn that layer off and then move to the nest layer and so on through the 760 layers

Any ideas would be great

Thanks

Hello! I'm making a poster for silk-screening. Each color needs to be on a separate layer so that each color can be hand-printed one at a time. Foolishly, I did not draw the colors on separate layers. I need a layer for the white outline, a layer for the purple, and the remaining layer the black (which will just be the color of the paper for those familiar with silk-screening). Posterizing doesn't seem to work, and selecting color range doesn't seem to nail it exactly either. I would greatly appreciate any help.

I am attaching the PSD file. Please do not reproduce this image (though i don't know why anyone would!)

Hi folks, newbie to the board. I'm using Photoshop CS6 and have hit an issue that I can't get to the bottom of and was hoping someone could help.

I've completed an image for a client. The original involves many layers, and I have got to the point when I want to merge everything down into a PDF for them to send to their printers.

Problem I am having is that when I try to directly save as a PDF or merge down the layers in a copy of my main PSD file, I am losing certain layer styles.

I have tried creating a blank layer below an offending layer and hitting CTRL + E, I have tried creating a blank layer, hiding all but the offending layer and blank layer and merging visible, I have tried Layer - Rasterize Layer Style, I have tried turning the layer into a smart object and then rasterizing (I lost the layer style as soon as I turned it into a smart object, even though it is still present in the smart object itself), and I have tried turning the layer into a group and merging the group. I have also tried saving the file in a number of different formats to no avail. I don't know what else I can try and why none of this has worked! I've also tried right clicking on the FX in the layer palette and chosen "Create Layers" at which point I get a dialog: "Some aspects of the effects cannot be reproduced with layers", and I get the same result. Most noticeable style that disappears is the drop shadow.

Weird thing is this isn't the case for every layer. I've particularly noticed it happens on text layers that have been text warped. However I've tried rasterizing them before trying to merge and that hasn't helped so I can't see how that is the problem.

I hope someone can help, I am totally stumped. If it makes a difference the mode is CMYK Color, 8 bit.

James

I am doing a tutorial and after making a full page angle gradient, I am told to click Ctrl +Shift+ U to make it monochromatic. This shows on my layer palette but my workspace image did not change. Can you help me solve this? Thanks..
I have screen shots.

I have some questions about a new layer vs. a layer copy. Let's say I am retouching a head shot. First I copy the Background layer (Ctrl-J) and clear up blemishes with the Spot healing brush. Next I want to soften some skin shine with the Patch tool and I want that on it's own layer. As I have tried various ways of doing this, it appears that I have copy either the Blemish layer or the Background. If I copy the Background layer, the the stacking order is critical: it has to be below the Blemish layer for the blemish fix to show. Copying the Blemish layer, then the Blemish fix is part of the Shine layer which defeats the purpose of a separate layer. New layer does not work for using the Patch tool, or I may be doing some completely wrong.

Then add another skin fix like soften the skin (Gaussian blur) and I'm really tied up with stacking order, etc.

Can someone help me with the correct order/procedure for creating layers that would be used like above.

Mixed up...

Todd

I have a 16 bit image which , due to raw pixel values, appears mostly black when first imported into PS. I can use auto contrast to stretch the image and to make edits, however this changes every pixel value. Is there a way to edit a stretched image then revert back to the original pixel values? I need to maintain the raw pixel values, as these are data I need to use for calculations. I saw one suggestion about using an Adjustment layer then cloning pixel values, but the adjustment layer will not stretch properly to see the image. Any suggestions?