Hey guys. This'll be my first post on this forum. I've never been that into photography and image editing until I got my hands on PS and realized how amazing the process is and how many changes you can make. I actually spend quite a bit of time messing with pics in my spare time now. That said, I'm still a beginner when it comes to this program, so I need help on a couple things.
The current picture I need advice on deals with the old "sun in the background" problem. Its a picture of myself riding a horse, but a noob mistake made me forget that you need the sun facing you in order to not have your skin appear dark. I know to correct this in the future, but I'd like to know if there's a way that PS can make this look a bit better.
I'm not uploading the actual image, but a really good comparison looks like this:
How could I get the skin tone looking normal?
My mom was in town last weekend and I'd like to make the pictures of her and my son and niece really pop and have a better look to them than just snapshots. I picture a solid background free of distractions, eyes popping and even skin tones. Both my son and my niece have dark brown eyes and I am having issues getting them to stand out.
I'm still learning how to do some things in photoshop but do know how to navigate mostly! Any critique is welcome or advice even! I want to learn, and with these pictures I'm not sure what I need to do to make them pop lol.
Thank you in advance!
hey everyone
i built myself a jukebox a couple of years ago and about the same time after trialling nearly every juke free or commercial around i come across touchjams , ive used it ever since and now im looking into making a interface skin that looks more realistic , ive never had a go at designing things using photoshop yet and any advice would be great , and if anyone wants a bit of fun id love to see some examples of what can be done
im looking at a more realistic button , definitely a 3d look , here is the interface skin i tweaked from thier website , i done the four album view the commercial one has smaller album covers but the programmer has added my skin to his website which was cool
heres a link to my build project which was a lot of fun , ive also added a picture of my skin , im
looking to replace the buttons on the left hand side for a start and also the play pause etc buttons
here are the juke pics if anyone is interested, you have to go down near the end of the thread page to see the finished project . http://forum.arcadecontrols.com/inde...,105231.0.html
Hi all,
The reason I went looking for this site in the first place (which I'm very glad I did and should have done sooner) is because, as a newborn photographer, the most common difficulty I come across in editing my images is in correcting thin, veiny newborn skin. I find plenty of tutorials on how to correct jaundiced skin or red, blotchy skin, but I can't seem to find anything specifically geared towards this. What tips would you all have for me?
Thanks!
I have some questions about a new layer vs. a layer copy. Let's say I am retouching a head shot. First I copy the Background layer (Ctrl-J) and clear up blemishes with the Spot healing brush. Next I want to soften some skin shine with the Patch tool and I want that on it's own layer. As I have tried various ways of doing this, it appears that I have copy either the Blemish layer or the Background. If I copy the Background layer, the the stacking order is critical: it has to be below the Blemish layer for the blemish fix to show. Copying the Blemish layer, then the Blemish fix is part of the Shine layer which defeats the purpose of a separate layer. New layer does not work for using the Patch tool, or I may be doing some completely wrong.
Then add another skin fix like soften the skin (Gaussian blur) and I'm really tied up with stacking order, etc.
Can someone help me with the correct order/procedure for creating layers that would be used like above.
Mixed up...
Todd
Hello,
I would like to remove background from image attached, but I don't have expierience needed to do it becaouse of dark hair and dark background. If anyone have some spare time to play with it I would really appreciate it .
https://www.dropbox.com/s/gs7kliiuw0...95236.jpg?dl=0
I need blank backround.
Best regards, Boris
if you dont mind, id appreciate the help. im not good with photoshop. please pm me
thanks in advance
Hey Guys , this is an image i found on google , i think its really simple and neat , though it has some effects that i have no clue how to make or design , that why i need your help . I basically want to re-create this image , its ok if it takes a while to come to the final output , a day , a week thats fine , now i'am going to go start on this image , so please keep giving me your inputs . mmmm So lets start with the background 1st , i'll make it a dark blue , but how did he get those sparkles ? :/ . Well as we keep progressing on this i'll keep uploading the zip file . so everyone can learn with me or even add thier own effects .
Kind regards .
Gautam.
I have seen this image before and we may have used it a while back. With a whole new set of players, I feel it's safe to bring it back in a new challenge.
No comments from the cheap seats on the condition of her skin. This is a lovely young woman and I would hope that we can all treat her image with respect.
I encourage everyone to give it a try even if your new to Photoshop. All participants should be prepared to explain the techniques they have been using, as we can't learn or help without some idea as to how it was accomplished.
Good luck!
Here is my 1st attempt.
edit: I start by opening the original and duplicating it and then turning off the original layer.
I create a new layer. This is the layer that I will do all of the following adjustments on.
I started by using the following tools and settings.
Healing Brush Tool - Mode= normal - Source= Sampled - Clone sample mode= Current level and below.
Spot Healing Brush Tool - Mode= Normal - Type= Content aware - Sample cloned data from composited data= Sample all layers.
Brush Tool - Mode= Normal - Opacity= 100% - Flow= 1%
This is the image (Layer A) after only using the tools above and one added Levels Adjustment Layer.
edit: I then select the uppermost layer (Levels Adjustment layer) and hit Shift>Option>Command + E to stamp all visible layers. I then name this layer A.
I highlight all other layers except layer A and the original background layer and group them. I then turn off the group.
I then start where the tutorial starts with only the layer A turned on.
Here is the image after using a skin softening technique described in this video:
Hi!
I have a dilemma with a high resolution picture that I want to use on a large screen. The problem is the screen has a low resolution which seem to distort the picture sometimes. Also I would like to zoom in the picture.
The monitor is a 47 inch HP LD4720tm sporting a 1,920 by 1,080 resolution. So the resoultion is like an ordinary desktop monitor but the size is more than double that. In other words, the pixel density (ppi) is much smaller.
The picture is of a clock. Size is about 670X670 pixels. I cropped out this clock from a larger 12MP Raw format Nikon picture. The cropped out clock looks something like this (my real image is copyright protected but this is very similar with 700x644px):
(http://www.stanleylondon.com/ClockShipsBellSml1.jpg )
On the screen this picture should take up a fixed size of 170X170 pixels (ie about 10% of the monitor).
The first way I did this was to simply in Photoshop Elements save the 670X670 picture as a png and with dimensions 170X170 pixels. ("Save for web" to get it as small in size as possible and chose png and 170X170). Then I put the 170X170 pic on the background canvas. It looks very nice. However, when I zoomed in the numbers and other details look very jagged or blurry.
So now I tried with the larger resolution 670X670px. I put this on the background too, and as it should only take up 170X170px, I clicked it and dragged to resize it. But this picture looks much worse than the 170X170 pic. I suppose the 170X170 pic perfectly fits the 170X170 space while the 670X670px is distorted. I mean, for the 170X170 pic there will be one pixel for each monitor point. When I do the exact same comparison on a 21 inch 1920X1080 monitor they look equally good, so it must be due to the low pixel density of the 48 inch monitor where the human eye can see each pixel.
However, now when I zoom in the details for the 670X670px were clearly visible.
I tried a few other resoultions like 360X360 and 270X270 (I resized the 670X670 pic to these sizes) and both png and jpeg. They also looked worse in normal view but of course in zoomed view they displayed more details than the 170X170 pic.
My dilemma now is how to get an image that will look good both when zoomed in and when in 100% zoom (normal view) on this large screen. Is there a way to do this. Eg like resizing to a resolution larger than 170X170 that will also look good in normal view.
Thanks.
Hey guys I have a image that I would like to have a gold tone. I want the whole image colorize with a gold tone, does anyone know of a way I can acheive this? Thanks